Discussion Locked

Hard Drive

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I put in a hdd that i took from another comuter. I set up the hdd and put win98 but it does not shut down properly.. Is it from the HDD or is it the computer or the softwear?? What are some possible solutions?

15 replies

by roland63

If by saying "it does not shut down properly" you mean it never comes up with the "Its ok to kiss my butt and shut me off now" (sarchasm builds ego), then there is probably something with SOFTWARE not getting along with Windows 98.

I sugggest youUNINSTALL the software one program at a time shutting down after each uninstall. I'm hoping you'll find the culprit taking steps back instead of forward - by this I mean, some people might tell you to uninstall all programs besides windows and reinstall one at the time shutting down after each install to make sure windows is shutting down properly. Eventually, either way, you will find out which PROGRAM is not "playing nice" with windows and causing the problem you're experiencing.

Good luck.

by dmiles

The video driver may be causing this problem,up date the video driver and see if this clears the problem up

by cdobbin

Start by making sure you have all the latest windows patches installed and that the manufacturer of the PC has not released and BIOS updates. If this checks out ok start looking to the programs running in windows.
Use msconfig to disable all programs and services starting with windows and see if this helps.

by msteinfe

If U installed win98 SE then there is sometimes a problem with the shutdown refer to microsofts webside for the "windows98 Second edition shutdown problem

thank U

by mcarrara

If the computer is on a network and you have hard mapped drives you will have problems shutting down. The computer will hang at the "Windows is shutting down" screen. Windows Update page has the fix. I had this problem with 50 new PC's until I found the update on MS update page.

by p1x1

GO TO THE MICROSOFT WEB SITE, SEARCH THE KNOWLEDGE BASE FOR A DOWNLOADABLE SOFTWARE PATCH CALLED 98SHUTSOWN.EXE AS THIS A KNOWEN ISSUE.IF YOU HAVE THE OLDER TYPE A.T TYPE POWER SUPPLY YOU WILL STILL MANUALLY NEED TO POWER OFF, NOT THE CASE IF AN ATXTYPE IS FITTED.

by the scruffy1

have you tried getting the shut down patch from microsoft as this was an issue with one of my 'puters.

This discussion is closed to new replies.