9 replies
by thechas
No.
First, Windows won't transfer a number of files that are in use by the operating system. The copy process will stop as soon as it comes to one of those files.
Second, some of those files are re-created each time the PC boots. So it is a waste of time to copy them.
Third, if you just copy the files, the new drive will not be a bootable drive.
Now, there are several ways to accomplish your goal.
1. Boot from a Windows startup disk that supports the native file system on the drive.
Use the XCOPY command to copy drive C: over to drive D:
Then, run the command sys D:
To make D: a bootable drive.
2. Use a utility such as Norton Ghost.
3. Some drive manufactures include utility disks that have a drive copy tool that duplicates your existing drive onto the new drive.
I recommend running these utilities in the manual or advanced mode to avoid having drive overlay and monitoring programs installed that you may not want or need.
Note: You will need to partition and format the new drive before doing any of the above.
Check out the information at www.fdisk.com/fdisk for details if needed.
Chas
by pkdell10
by rcom
Depending on the version of Windows xcopy will not copy system read only and hidden files.
There's switches /e /s /h /v /a that have to be used in conjunction with the command. This can be done but using one of the software programs designed to dothis is more sure fire and not that hard.
Ghost, EZ drive and others can be used on an unformatted drive to make a duplicate of the original.
by pkdell10
by zlitocook
by pkdell10
by cowen80194
I have used Drive Copy and Drive Image these are great products I have recently moved to Ghost by Norton this I find to be worth every bit.
I use Ghost for network copies but works locally or over the printer port for making images or partition transfers.
by pkdell10
by pkdell10
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending