Discussion Locked

hard drive failure

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I swapped out my hd for one i was trying to test for a client now my orig hd is giving me boot failure. i did get a spark from the patch that may have fried my hd. what are my troubleshooting options?

7 replies

by dmiles

You can try switching the cables to see if it would help,make sure connector orientation is correct.

Try installing the drive in system as a slave drive to a master and see if it can be seen in the bios

It may be that nothing will be helpful if their was a spark that may have shoterd out the circuits on the controller board of the drive

by thechas

If the controller on the drive did suffer ESD damage, your only option is to find the exact same model drive, and swap the controller cards.

This requires a skilled electronics solderer, but is the least expensive way to recover the drive.

Chas

by nickmkhn

RE: what are my troubleshooting options?

First visit the manufacture’s site, download their troubleshooting utility
(for example, for IBM it is the Drive Fitness Test, for Quantum or Maxtor it would be the Power-Diag 3.04).

Most IDE hard drives are covered by 3-year warranty (5 on SCSI). Call your manufacture’s free support 1-800 line.

This discussion is closed to new replies.