If you are sure that you have your original drive you can recover the data fairly easily at a Data Recovery House as they will be able to do Forensic Data Recovery and get to your data. The problem will come about because HP has more than likely used a different type M'Board that has different drivers so if you don't get the drive cloned at the start you will most likely not be able to install a working copy of the OS as HP Slipstreams only the required drivers to their Recovery CD's and if you have a different type M'Board you will not have the right drivers for it.
You can use Forensic Data Recovery Software but unless you know exactly what you are doing you can do more damage than good and make it more expensive to recover your data. If you want to have some idea of what is involved look here at X Ways Forensic Recovery Web Site
http://preview.tinyurl.com/n5gqk
Actually it's possible to recover every layer of data on any HDD but it's horrendously expensive and generally speaking only National Crime Authorities use this when they are fairly certain of a conviction and want that bit extra to push the evidence over the top. This comes in at about $750,000.00 or in that vicinity so it's not something to use at every opportunity and defiantly not by members of the general public as it's both expensive and time consuming. Basically the Recovery Places disassemble th HDD coat the platters with some green goo let it dry and then place the platters into a special machine and read everything that has ever been written to that HDD. That's the simple explanation but it gives a fairly good idea of what is involved.
[i]3. What makes you so sure that HP won't cover the cost since it's their snafu?[/i]
If they used a different type of M'Board they had no option but to place new image on the HDD as the old one would not have booted and returning a nonworking NB after repair isn't considered as acceptable by anyone. You also would find that you didn't have the necessary tools to perform a Repair Install so the NB while fixed would have remained non working. The most likely thing that has happened is that HP has supplied a newer M'Board and it has different Drivers and a Different Chip Set so your Recovery CD will be useless in allowing you to reload the system.
[i]4. What is the recommended easy way for a techno-neophyte to back up data? Must be fast, easy, and fool proof as I'm all three.[/i]
Others may disagree with me here but in cases like this I prefer to have a HDD in a USB Caddy and Clone it regularly. That way if the HDD fails you can slip in the Clone copy and be running again quite quickly. You just need to remember to replace the Dead HDD and clone another copy along with the OS and your Data.
While you can just copy your data across to the external HDD you will need to reload the system if the HDD breaks so it's faster to clone which takes slightly longer but is much faster at getting a working system when things go wrong. The down side of this is that you need to carry around another HDD in a USB Caddy and not one of the pre built units you need to buy the Drive and the Caddy and fit the drive to the Caddy so it can be pulled out quickly. You also need to treat this carefully and not throw the external HDD Caddy around and use either an external Power adaptor or both USB plugs just to make sure that you are getting enough power to the HDD so it doesn't die in the process. I would suggest plugging directly into the NB and not a PCMCIA USB Card as these don't supply enough power to drive a USB HDD but if you use a Powered USB Hub just the main Power & Data Plug will do.
The other down side of doing things this way is if the external HDD gets stolen anyone will have direct access to your data which isn't considered as a [b]Good Thing[/b] when in business.
If that is too confusing post back to where I lost you and I'll try again to explain it simpler.
Col