Discussion Locked

Hard Drive Installation HELP needed - pl

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello -
I am installing a new hard drive as my old one (1 1/2 years old) HP PC died.

I purchased an 80 Gig Drive and was successful partially at installing it. It seems I did ok w/ the jumper settings and the physical part of putting it in the tower and my Bios does recognize it.

However my system was running Win ME and I am wondering if I should install Win 2000 instead or possibly both? I use Win 2000 at work and it seems to crash next to never.

I popped in the disk that came with it and once I got to FDISK I was stuck.
HOW DO YOU AND IN WHAT SIZES DO I MAKE DOS DRIVES? PARTITIONS? LOGICAL AND EXTENDED DRIVES? SHALL I INSTALL TWO OS's? Will my devices be compatible w/ both OS's? Is their any reason I need both?Just 2000 I was thinking.

This is my first time doing this (as you can tell, I am lost). Please Techies throw me a friggin' bone here.

Much Appreciated - Tracie

Oh and do I need a Boot Disk? What files must in contain? I downloaded one for Win ME, and DOS, when I tried it, screen read missing NTLDR.

OK, so I am pretty lost and missing my computer here :(

10 replies

by thechas

For more information on partitioning, check out www.aumha.org
and www.fdisk.com/fdisk

If you wish to dual-boot Me and W2K, I would create a primary dos partition of not more than 32GB for ME.
After creating the pPrimary DOS partition, you will need to make it the active partition.

Partition the remainder of the drive as an extended DOS partition, you can create at as many logical drives as you need there. (I believe that there is a size limit for the W2K boot partition) (you can allocate the rest of the space latter if needed)

I would go so far, as to create a partition to store shared data files for use in either OS.

Install Me in the "C:" drive.

After Me is running properly, you can then install W2K in the extended DOS partition.
Use the custom option when setting up W2K, then install W2K onto a drive other than "C:"
When asked, respond yes to setting up a dual boot system.

Chas

by thechas

If your system can boot from CD, then you do not need a boot disk.

Where did you get the boot disk?
While NT and W2K need ntldr, Me should not.
(Except in a dual-boot setup with NT, W2K, or XP)

You should have an Me startup disk that came with your system.

Chas

by brian

If you like your Win2K at work, I wouldn't bother with the dual boot. I would advise you to make one partition and put Windows 2k on it. I have setup dual boots and think that most users only use the second OS if they have to to run a particular program. Even then they tend to only use it if they have to. Unless you have a MUST HAVE program that only runs in WinME, I wouldn't bother with the hassles. Just Install Windows 2K and enjoy a reliable, stable OS.

by maelgwyn

I would run 2k only if you dont need it to do heavy gaming - as 2k isnt as good (but passable) but... if you use it at work, i concur that it should be the only one needed. How to install -

put in 2k cd

change bios settings to allow the machine to boot off cd

follow the bouncing ball

by danlebaron

I would install windows 2000. It is based off the 2000 server kernal and is more dependable. You wont need the fdisk, this utility is included on the Windows 2000 cd. Start by changing the boot sequency in the bios to start with your cd rom drive,save and exit. Insert the Windows 2000 cd and reboot the computer, Press enter to boot off cd when screen asks to do so. Windows 2000 will load setup routine. Press F8 to agree to license agreement, create a full 80 gig partition and format with NTFS. The onscreen information will walk you right through this. After the computer finishes the format it will automatically load the os, follow the onscreen instruction to finish the Operating system load. You can use the setup defaults.

Dan

This discussion is closed to new replies.