Discussion Locked

Hard drive not recognised in BIOS

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After a quick power failure in the building Maxtor hard drives not being recognised in the BIOS. I would like to recover the data and sending them to a data recovery company is not an option.

Is there any way to force the BIOS into recognising the hard drive. I have tried this so far all unsuccessful:-
- manually entering heads, sectors but BIOS will not accept the cylinder numbers.
- tried sharp knock on hard drive
- tried freezing
- tried changing the controller board with a known good one
- tried recognising a good hard drive and hot swapping with the faulty one.

5 replies

by bobbyc

It counds as doth the drive is totally dead, hot swopping can cause the hd to blow totally, as long as u have insured that data cable is not the problem and have tried a differant power connector, their is nothing else i can think of

by ozi eagle

Hi,
I had a client who suffered a power surge and his HDD died (also a Maxtor). I tried installing his drive in another, good, computer as a slave drive. The other drive on that IDE cable also wasn't recognized on power on. To me it indicated that the electronics of the Maxtor drive were fried.
The only simple solution I can think of is to get hold of an IDENTICAL good drive and swapping the electronics and then copying the data to another drive. I have not tried this because I can't find an identical drive.

by sscsystems

less of an answer, more of a question -

does the hard drive spin up? does it make any sound at all?

i'm wondering if it's even powering up

This discussion is closed to new replies.