Discussion Locked

hard drive not recognized

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm running nt server with service pack 6 on my removable HD. one day, the hd doesnt boot up. it displays an error that says "hard disk failure" or something like that. its not even detected by my computer in the cmos (detect hd). what is the problem?
corrupt mbr?if so, how do i fix?

12 replies

by poettone

It would appear that the hard drive encountered a hard error, either it has failed or the on board drive controller has failed. Typically when a drive will not auto detect it could be a loose cable, and in this case we know its not a incompatiblity problem (it used to work and would detect). To answer your question although elementary , the MBR would not even come into play at this point. When a drive is new there is no MBR, it only creates a MBR when a operating system is loaded, and the MBR will be placed on the first sector which is sector "0" . So this is ruled out as well.

In short your drive has failed.

by russ werner

Before you discard the NT hard drive, try booting your computer on Win 98 boot disk. See if you can run fdisk and see the hard drive. Use option 4 to view partitioning. You may not see it correctly if you had ntfs, but it isn't working now so try todelete the partitions and reformat it fat. Then reinstall NT...

by paulote

removable???....just probe the disk without the removable case...surebthats the problem

Paulo

by acosgrove

Let's keep this simple. If the HDD won't autodetect in the BIOS, it's either a HDD failure, a power failure, or an IDE Controller failure. You can try plugging the IDE cable directly into the HDD as opposed to using the Removable Drive Mount. This will rule out the controller in the mount. If it still doesn't work, you can try plugging it into IDE2 on your motherboard. If it still doesn't autodetect, try plugging an ATAPI CD into one of the IDE Channels on the Motherboard and boot with a WIN 98 install disk. If the computer sees the CD Rom then you know the IDE Channels are good. If you do all this and the CD works but the HDD still doesn't then try using a different lead off the Power Supply. If it still doesn't work it's probablya bad HDD. I wish you the best of luck.

by acosgrove

I just thought of something else you can try which may resolve your problem much quicker... Before you take ANYTHING appart, try mounting a different HDD in the Removable Drive Cage and see if the computer recognizes that one. If it DOES, then trymounting the origional HDD 1 more time. If it still doesn't work you can try plugging it in bypassing the removable mount but the drive is most likely bad. I don't know why I didn't think of this sooner!!!

by galamb

Sometimes the BIOS or OS including the infamous Windows 98 boot disk will not recognize a troubled hard drive even if it recognized it before. I agree with the advice already given, but if your computer will recognize another drive but not this particular one you might want to go to the drive manufactorers website and down load a disk utility for that drive. Some of theses utilities will not only recognize your drive when your OS cannot but can re-format and partition as well. Some even let youimage your drive onto another HDD. Many of them have utilities that may help repair the drive without losing data. Good luck and keep us posted.

electrojolt

This discussion is closed to new replies.