Discussion Locked

Hard Drives in Old P5-60 Gateway

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I would really appreciate any help i can get on this one. I was recently working on a P5-60 Gateway system. My problem was that no matter what i did i couldn't get the 3 gig hard drive to work with the system. I know the old system have limitations on HD size, but the system was working with the 4 gig hard drive before. I was able to hook up an 1.6 gig hard drive, but when i boot windows it wants me to point to the Command Interpreter. I tried all kinds of user defined settings for the hd but none worked. To finish up the story. I want to be able to use the system with both hard drives. One is 1.6 gigs which is being recognized and the other is 4 gigs which is not recognized. Any help appreciated.
Thanx

4 replies

by thechas

Thought #1. Some of the older IDE drives do not get along with mixed brand configurations. So, try the drives on opposite channels.

#2. A P5 should support up to an 8,4 GB without the need for a bios interpreter. If someone installed different BIOS interpreters on the drives, they probably can't work together anyway. Just in case there are remnants of one on either drive, use fdisk /mbr to clear the master boot record. Of course, fdisk will wipe the drive, but that may be what you needto do to clear the drive.

Does the 4G drive work in another system? That would give you a clue as to the direction to take.

You might be able to look up the MB specifications on Gateways site. It is a pain to do, but if your persistant, mostof the information is there.

by nigel100

i think you need to check the jumpers on the drives. set the existing (bootable) hd to master and the other to slave. i expect that one or both are set to cable select.

This discussion is closed to new replies.