11 replies
by drb63
by stophfromhed
by stophfromhed
by bohicam1
Not at all. I have worked on dells, HP's, compaqs...etc...and all have their drives in different positions from the factory. There is no problem in any position due to the fact that the platters that spin inside the drive work in a vacuum.
Mike
by stophfromhed
by ann777
Not problems with the any of the current drives made these days. It used to be that if your formatted a drive mounted sideways, the drive would develop problems when/if your laid and used the computer flat. Today's drives turn at 7200 rpm or better ans do not have problems with this.
by stophfromhed
by thechas
Mounting a drive on it;s side should not be any problem at all.
Some drives, especially older drives will have a shorter service life if you mount them upside down.
The bearings were not designed to support the platters in that orientation.If you have questions about a particular drive, it is always best to follow the Mfg mounting recomendations.
There recomendations are based on minimizing warranty returns. So, while the drive may function in other orientations, it will likely havea shorter service life in a non-recomended orientation.
Chas
by stophfromhed
by stophfromhed
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending