3 replies
by jeffs5370 Accepted solution
by older mycroft Accepted solution
HOW MANY hard drives are connected now?
Have you tried to boot with ONLY the hard drive that was originally connected on its own?
Did you get the original operating system install discs with this computer?
by ic-it Accepted solution
mount or try to boot dependant on their jumpers.
Carefully look at the back of the drives. If the jumper is in the cable select (CS)position, then the drive at the end of the cable is trying to be the system drive. the middle one becomes secondary. Change the drive locations and you should be able to boot normally.
You can then Explore the other drive. You may need to take Ownership to access some folders.
The formally unhooked drive may have the jumper in the M or Master position.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending