7 replies
by lizzy
Sort them by type (sound, modem, NIC, etc.) and put them in plastic baggies in cardboard boxes for each type. Wear a static guard wrist strap when handling the cards. Then when you need them, you can identify them by the chip ID number and manufacturer and download the latest drivers. You could also sort them by physical architecture (ISA, PCI, etc.) This way you could use newer equipment when needed. If you have so many that you have hundreds or thousands, this is not going to work too well.
If you have lots of old equipment taking up space, consider donating it to a non-profit group that could really use it. Virginia Association for the Blind takes used equipment and lets volunteers and computer students at local schools refurbish it for use by blind or vision impaired clients that would not be able to afford a computer.
Best wishes.
by siwel5
Hi if any of them have an FCC ID No on them then you can go to this url http://www.fcc.gov/oet/fccid/
this will give you the manufacturer and model number.
Rich
by siwel5
by thechas
If you are looking to test and verify that the cards function, you will need a test system.
You don't need a large hard drive, but you do want to setup a secondary partition with the Windows CD and the motherboard drivers on it.
That way, when the registry gets overly corrupt from swapping hardware, you can wipe the C drive and start over again quickly.
Chas
by siwel5
by siwel5
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending