3 replies
by rebalumni Accepted solution
by hal 9000 Accepted solution
Going faulty would be the most obvious thing but there are many other things that you could try.
Remove & Refit both drives as it's possible that some corrosion is forming on the contacts and preventing a clean boot every time and then run some diagnostics tools like The Ultimate Boot CD available from here
Or you could try a Visual Inspection looking for grainy Solder Joints that have gone bad over time. If the unit is still UG backup all the data and send it in for warranty repair otherwise you're stuck with a total dismantle and inspection which may not revel anything but it may work perfectly once it's been reassembled.
This sis something quite common with NB's as they always lead a hard life.
Col
by seysearles Accepted solution
Hello there, i realise that this post was a while ago, however i am having almost the exact same symptoms and was hoping that you could let me know, how/if you managed to get to the bottom of it.
Thanks i would really appreciate it.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending