Drivers are needed for a SATA controller that isn't operating in Legacy IDE mode:
- Legacy Mode must be set in BIOS before boot
- various Mfg. have different names for it
- some call it Native Mode, Legacy Mode, etc.
Legacy / Native IDE Mode is offered on some of the newer MBs that use SATA-II 3Gb/s controllers
and some boards don't support it and must use drivers,
most are phasing out Legacy / Native mode as vista & 7 support SATA out of the box.
there are limitations to the Legacy mode such as no hot swap / plugging of drives in a running system, etc.