Discussion Locked

HDD partitioning for large disk support

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a 30 gig HDD but when I try to FDISK the computer will only recognize and therefore partition in 2Gig chunks. Isn't there a way to enable "large disk support"? I thought I remember doing this on a previous machine.

8 replies

by roland63

Your 30 GB HDD vendor should have included a utility to bypass all that baby stuff and fool your bios into thinking its capable of handing such capacities.

If you have the utility (usually in the box with the drive) use it - otherwise visit the vendor's site and download it.

It will save you tons of grief.

Good luck.

by guidos

What version of fdisk are you using, and what operating system? If you're using the old version, which I think you are, that's all it'll do. Copy the fdisk from your Windows\command folder to your floppy, and use it...it will ask you if you want to enable large disk support...

by awdfg

Only Windows 95 OSR2 and above and Windows 98,Windows NT with Service Pack 3 and above support large disks.You have to use the Fdisk command from Windows 95/98 or the Disk Administrator in Windows NT to partition a large hard disk.
You can also usethe Disk Manager software.If you don't have it you can download it from www.ontrack.com

by mongous

Sorry for rejecting one of you. Didn't mean to. I am new at this. All answers were helpful. Thanks.

This discussion is closed to new replies.