9 replies
by donald.laing Accepted solution
by hal 9000 Accepted solution
Listed here
And when the Windows installer is starting press the F6 key to add drivers and find your M'Board CD and copy the SATA Drivers to the Root of a Floppy then use that Floppy to install the SATA Drivers.
The problem here is that you don't have the necessary SATA Drivers installed to allow the system to boot off a SATA Drive.
Col
by donald.laing Accepted solution
by hal 9000 Accepted solution
There is a Jumper on the drive and depending on the make you may need to move this or even remove it so that it's visible in BIOS.
What Brand of HDD is this? And what size is it?
What M'Board [i]Brand Model & BIOS Version Number[/i] are you Running it on?
Where on the IDE Cable is this drive located? [i]The end connector or the middle connector.[/i]
Finally when you open the drive in Windows can you see all of it like something close to its rated size or are you only seeing part of the size of the drive?
Col
by willcomp Accepted solution
by donald.laing Accepted solution
by donald.laing Accepted solution
by hal 9000 Accepted solution
You'll need to try a BIOS Flash to the latest available for your M'Board System depending on who made the computer. If it's a Prebuilt unit you can go to the makers Web Site and download the most current BIOS Update and the Flashing Utility and if it's a White Box you'll need to go to the M'Board Makers Web Site and download the newest BIOS and Flash utility.
If you are a bit squeamish about Flashing the BIOS you can buy a replacement BIOS Chip from here with the latest BIOS on it
They have the necessary procedure to identify the correct type of Chip and how to identify the BIOS version on this Web Site and offer an excellent service. I personally always buy new BIOS Chips for any Mission Critical Server Platform as it's a 5 minute job changing a BIOS Chip and a much longer time being without a Computer if the Flash Fails. $30.00 US is much cheaper than 10 minutes of Downtime and when you have a BIOS Flash go bad you'll be down for much longer than 10 minutes.
Col
by donald.laing Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending