While you have installed the OS you still need to install the WiFi Driver which should be on a Install Disc with the Wireless Hardware Makers name on it. If you look in Device Manager that you get to by left clicking on Start-Control Panel-Administrative Tools-Computer Management-Device Manager look for yellow filled in circles with a Black Exclamation Mark to the left of the Unknown Device. These are bits of Hardware that are yet to be installed.
The obvious things are Video, Sound, Modem and Wireless Devices being the most common but there could be others. It's rarely important her to get the Sound Drivers installed before you even log onto the Windows Update Site as some Sound Devices do not have Digitally Signed Drivers so they Must Be Installed before you log onto either the Windows or Microsoft Update Sites. If they are not installed prior to logging onto the Windows Update Site you will not be able to install them after Window Update installs Windows Genuine Advantage.
[b]If you have a System Makers Recovery Disc what you need to do is insert the Recovery Disc and then right Click on one of the Yellow Circled and select Update Driver from the Drop Down Menu. Let the system Auto detect the Driver on the Recovery CD and when that one is installed you need to move onto the next till they are all Installed.[/b] If you don't have a System Makers Recovery Disc like one from HP, Dell or so on you need to load the individual Drivers for your Hardware. Most of these will Auto Run when you insert the Hardware Makers Install Disc and then give you the option to install the various bits of hardware though they will be on different Disc's as they come from Different Makers.
The M'Board Chip Set Drivers are important here as while the default Drivers will work the actual drivers for your M'Board will work better and make the system work properly. Most current generation M'Boards have Sound and Ethernet on them so when you install the M'Board Drivers these will also be installed. The M'Board Disc will have a Name like Gigabyte, ASUS, ABit, ECM, Foxcom, PC Chips or several other names depending on who the M'Board maker actually is. That's the easy bit as there are not a lot of different M'Board makers where as individual Hardware can be made by a lot of different Makers so there may be many different Names involved here. While Intel is by far the most common Wireless Maker there are quite a few others who could be used here so you really need to look at what Disc's you where provided with when you bought the computer.
[b]If there are no yellow filled in Circles you have all the Device Drivers installed and now need to setup the Wireless Network. The easiest way to do this is to left click on Start-Show All- Accessories-Communications-Wireless Setup Wizard and then follow the prompts to configure the Wireless Networking. Here if your Wireless Connection has any Security built in like SSID, WPA, WPA 2 you will need the Routers or Wireless Access Points Security Codes. These can be called several hings depending on who makes the Wireless Access Device which is what you need to connect to and you will most likely have to enter a Password and a PassPhrase though the different WiFi Access Point Makers can call these different names.[/b]
If you do not have these Disc's any longer you can use a Utility like Unknown Device Identifier available here
http://tinyurl.com/2zv25t
You will need to download this on another computer and then transfer it across with something like a USB Thumb Drive or something similar that you currently have. This could be a CD Blank or maybe a Ethernet Connection though a USB Thumb Drive is by far the easiest to use here you can use what you have available.
When you know what you need you can use the other computer to look on the Internet for the Drivers and Associated Software if any for your Make & Model of Hardware and the OS which here is XP.
If it helps you can send me a Peer Mail by clicking on the Send Message below this post and I'll get back to you faster than I can on this site as I only get notifications once a day.
I hope that makes some kind of sense as I've added bits and pieces all over the place to try to be easier to understand. I don't know how well I've gone here though.
If your Dell Recovery Disc isn't available you can download the required drivers for your Insperon 8600 from here on a different computer and then transfer them to your NB to install them
http://tinyurl.com/6ooxks
You will most likely need to use something like Win Zip to decompress the downloaded files and that is available here to download again on a different computer.
http://tinyurl.com/3k7vj8
Col