Question Locked

help installing bios from dos

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

while installing a new hard drive due to the death of the old one, i encountered the error message "510-splash screen image corrupt. the splash screen image has errors. run rompaq to restore the default image in the system rom".

i do not seem to be able to find a bios that will install in dos, as i have no OS to boot to. i have a Hewlett Packard Compaq (187498-001) Motherboard. the only versions i have found are windows installers. the current system rom is 686p2 v1.13. i am running a p3 933, 512mb ram. i was running xp pro when the hd died. the hd began to make a "clicking " noise, followed by frequent blue screens and lockups. i installed another hd and tried to install xp again. after booting from the cd drive with the xp install disc i received this error message. "Boot: memory overflow error. please insert another disc." being unsure what do at this point, i placed the new hd into my other computer and performed a clean install and returned the hd. this is when the 510 error occurred. this machine had win98se when i bought it. when i installed xp the first time, i had to remove the disc during each reboot before the install could continue. i would receive the "boot: memory overflow error. please insert another disc."

5 replies

by mjd420nova

The BIOS resides in a chip on the motherboard, not on a disk or CD. I'd first try to to get the BIOS set to default, and then attempt an install from there. Having done an install on the drive on another computer might get it booted, but I'm sure you'll get a load of errors. As a last resort , try blanking the BIOS by removing and replacing the CMOS battery.

by wabbitseason_2000

i can still enter bios. to the best of my knowledge it is set to the default settings. i am of the impression that to get past my 510 error i need to flash and install a new bios. this must be done in dos. i also unpluged the power cable and removed the cmos battery for 15 minutes. the old bios is still there.
i am sorry if i am not understanding you properly. i cant even attempt an install until i resolve the splash screen error. thank you for your patients.

by cg it

download the new BIOS from the mfg board site.

create a bootable DOS floppy disk.
extract the downloadable BIOS to a second floppy disk.

boot from the DOS boot disk.

remove the DOS boot floppy disk and put in the floppy with the BIOS
at the A: prompt execute the BIOS .exe file.

by wabbitseason_2000

but you forgot one very important detail......

the gratuitous thank you!!!!
i am going to name this computer in your honor. it is now known as "FUDD".
also, i no longer get the memory overflow error. i wonder if that was a limitation of the old bios?

This discussion is closed to new replies.