5 replies
by buffalodan
And S3's web site is unavailable too. hmmmmm
have you tried an updated driver from these sites...
www.windrivers.com
www.driverguide.com (id=drivers, pwd=all)
www.winfiles.com
by mtnsqs
These onboard versions often have very specific drivers to the motherbeoard. Fidn hte original CD that came with the motherboard and install the drivers from that.
Otherwise, go to the motherboard manufacturers site and try to find the drivers from there.
Otherwise you may have to get the S3 one - www.drivers.com should help
It may be that the onboard driver chip is fialing - try putting an graphics adapter card onto the system and you may get the resolution you want.
by barmaley
Just the addition to last answer
check for ghost drivers first.
Second, with HP Pavilion computers the rae recovery CDs. 2nd or 3rd recovery CD is Application recovery.
Put that CD in, it autostarts (if not, locate recover.exe file on CD and run it), click on Device Drivers and choose your video driver and click OK.
Before reinstalling the driver you might want to remove previous driver first.
Hope it helps.
by ridire
I have the same dsarkness problem with an S3 Savage 4 card, and have used this utility to overcome it. I think it is monitor related, as other monitors are not as dark with this video card. The link is designed for the Savage family of cards, but might work for you still to add Gamma correction where it is not available inately.
Link: http://www.tweakfiles.com/video/s3tweak.html
--Paul
by mystifymnow
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending