15 replies
by darts32
Take a look at the following:
http://kingston.com/support/faqs/memory/default.asp
This should answer all questions.
by edinac
by thechas
DDR RAM speeds are 'similar' to CPU speeds.
The higher the number, the faster the RAM.
DDR RAM needs to be at least as fast as your FSB (front side buss) speed in order to maximize performance.
There is no benefit in buying RAM that is fasterthan your motherboard will use.
Check the manual for your motherboard, or the manufacture website for what speeds of memory are recommended / supported.
Basically, for socket A motherboards:
FSB 100MHz PC1600
200MHz PC2100
266MHz PC2700
The Kingston FAQ is pretty good, I just don't remember how well it covers DDR speeds.
Just a side note:
If you are running Windows 95, 98 or Me, there is a bug that can cause problems if you install more than 511MB of RAM.
The bug is VERY configuration dependant.
Microsoft's 'fix' is to remove memory, or tell windows to only use the first 511MB of RAM.
Chas
by edinac
by csmith
To check for the correct memory for your PC check:
http://configurator.pny.com/external/
This will save a lot of time.
Regards, Chris
by edinac
by zlitocook
by edinac
by kc 1
dder ram is a type of dram that runs duoble the speed of yuor memory bus,(double data ram) which is supported by processor making copanies such as Intel, amd, and cyrix. This ram comes in DIMM modules. to caculate speed here's a small table.
timing actual speed rated speed
10ns(nanosec) 100hmz pc66
8ns 125mhz pc100
7.5 ns 133hmz pc133
ddr os second to rdram which is in rimm modules rimms typically run at 800mhz, so overall output is 800 by 2= 1600 (remember 2 modules should be the same) or 1.6 gb the same as pc1600 ddr
for more info check :
www.crucial.com
www.kingston.com
by edinac
by edinac
by akula
by edinac
by edinac
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending