9 replies
by morrisonk
My first question would be what software are using to burn with. The problem may lie with a setting in the "Options" or "Preference" tab. That's where I would start. Also check and see how your systems resources are doing. Your burn speed may beaffected by your lack of resources especially if your multi-tasking while burning.
Hope these help.
by thechas
1. Did you change brands of blank CDs? Some drives like some disks better than others.
2. Do you have some new programs that run in the background?
The number one slowdown for CD burners is extra CPU load from other programs that are running.
(with my 750MHz system and a 4X CD-RW drive, I need to shut down all tray, and most back ground (alt-ctrl-del) to get a clean burn.)
One likely suspect, is some new adware that you gor from a website you visited, or an update to your MP3 sharingsoftware.
Download and install AdAware from www.lavasoftusa.com
Unfortunately, removeing the adware, may disable the program that gave it to you.
Next, how mauch RAM do you have?
I use between 128MB and 384MB on my 9X boxes. And a couple with 196MB appear to perform slightly better than the ones with more or less RAM.
How much free space is there on your hard drive?
I would consider 1GB to be the absolute minimum for burning.
If your motherboard can take it, you can upgrade your CPU for under $30.
Check out the selection of Slot 1 CPUs at www.compgeeks.com
Just make sure that the CPU is fully supported by your motherboard.
Chas
by qballrail
It appears the settings may have been changed. Roxio EZ CD Creator provides the option to set a default burn speed for data and a different for mp3's. Check your burn preferences. If you do not have Roxio EZ CD Creator 5, try to obtain a copy. There are always "alternatives" to retail ;) Especially if finances are tight..
One other suggestion may be to defrag your hard drive. If you have Norton Utilites, also run WinDoctor.
Hope this helps!
by mski
As in answer 1, have you checked the burn speed setting in the software you are useing.
The only other likely cause was kind of mentioned above as well, are you using different CD's, CD burners can identify the maximum burn speed of a CDR and will not let you select a higher speed than the CD is rated at. I would advise you to buy some new CD's that state their burn speed on them as a start to this problem.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending