Discussion Locked

Home Networking

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do you network two desktop computers, using wireless technology?

5 replies

by thechas

1. Install wireless adapters.
2. Setup system hub if required. (You may be able to set up one of the PCs as the hub with a special adapter.

3. Install a networking protocal such as peer to peer networking on both PCs.

When you purchase a system, there should be instructions included.
If the instructions are not clear, check out the mfgs web site.

Chas

by alpha-male

Here is a very good article on setup, configuration and (not to be overlooked) security.

http://www.extremetech.com/article/0,3396,s=1034&a=13521,00.asp

This combined with the manuals from your Wireless hardware should get you hooked up in no time. For hardware information and details, check out CNET's reviews:

http://computers.cnet.com/hardware/0,10121,0-7055-402-0,00.html?tag=dir-802&pn=1&ob=1&qt=&qn=&F3=0&F5=0&F7=0&F8=0&F9=0&F10=3&F11=5

I went with a Linksys WAP-11 and Orinoco cards...and have been very satisfied.

Make sure to delete any spaces in the above URLs.
Hope this helps!

This discussion is closed to new replies.