New cr2032
1. Had power & cables and wires disconnected for 13 hours.
2. Put new CR2032 in and let the PC stay idle for a hour, then power on.
3. New phenomena:
3a.Monitor. Takes about 40 seconds to light up after power on.
3b.Logo. About 2 seconds later acer logo appears.
3c.On & off & flashes.
Screen on for 3 seconds, off for a second, on again.
After on & off 2 times, there are flashes as machine gun for about 2 seconds.
After that, one short flash lasting about 2 second.
Then, on for about 15 seconds, off for 1/2 a second, & on again, 3 times.
Then, monitor stays on for 40 seconds.
Then, 2 short flashes, each lasts about 1 second.
Then, again, on for 20 seconds, off for 1/2 a second, one & off for 2 times.
Stays on, then the monitor stays on stably.
Note : acer logo is on the screen every time monitor is on.
After all these, the PC's status is the same as stuck before.
What do these bebaviors indicate?
Suggestions & Advices, PLEASE ?