Question Locked

How do I change the Dimm Speed?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a question. My motherboard is a Gigabyte 8vt800-L and it says all over the documentation that it runs DDR 400 memory, and that is what I have installed (two bars of a gig each... kinstons yada yada yada) yet when I boot up it states that my system has a Dimm speed of 266?

Is there something wrong here?

4 replies

by hal 9000

In the correct RAM Sockets. DDR RAM or more precisely the CPU runs at 800 MHZ Front Side Bus Speed and if you don't have the RAM configured as Dual Ram it will not be feeding the CPU with 2 streams of data and it will show that it's running slower than it should.

The manual is available here for download if you no longer have your M'Board Manual available.

http://tinyurl.com/y5nzmf

It will tell you in which of the RAM Sockets the RAM should be located.

Col

by naw-yi

cpu/type
mb/bios version
memory/type
psu
with what youve given noone could give u a good answer, just a guess.

by hal 9000

[b]helped[/b]

CPU Type = Intel P4 / Celeron

M'Board = GA8vt800l Gigabyte

BIOS Version Number shouldn't matter as every one supports 400 MHZ RAM

Memory as stated 2 X 1 GIG Kingston RAM Sticks

The question here is how the RAM is arranged and what type of CPU is involved if it's a Pentium 4 the RAM isn't in the correct sockets for Dual Channel RAM and if there is a Celeron well that's anyones guess as to what it allows the RAM to run at.

Col

This discussion is closed to new replies.