Question Locked

how do i install xp home on an hdd in an enclosure

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a sony vaio p3 with xp home it crashed i formatted and it wont let me boot from cd even through the bios or usb(no option)

so i bought an enclosure and cant install windows to it , on first restart of install a blue screen tells me windows startup program doesn't recognize the drive in the enclosure and i need special software(doesn't tell me what software)

so i found a tutorial telling me to install dos 7.1 on the disk using a 44 to40 pin adapter (which i don't have) and then copy the file i386 from the windows disk and run setup from dos.

i cant figure out to install dos to the drive from the enclosure

so any help on this would be great

26 replies

by peconet tietokoneet

What i mean by that is, Is it (was it) already installed on the system when you bought it?
If so then sometimes you will have to install a floppy (dos) before you install the disk in question, and that seams what the system is asking for. Have you got ALL the disks when you bought the system? If so then the FIRST disk would be called "Setup disk", this would be either on a floppy or cd. Once you have installed this it will ask you for the other disks in question.

by hdhntrs

since sony doesn't supply restore disks and this computer is used and i didn't know to create restore disks before i formatted all i have is an iso windows home i don't even know what sp it is

by hdhntrs

really all i need to know is

what is this special software windows setup refers to and

how do i install dos to a removable disk

by hdhntrs

yes it works fine in the desktop but the sony will not boot from cd even though it is set first in bios also there is no option to boot from usb

by hdhntrs

anyway i would like to use this enclosure that i have install dos to the hdd and the run win setup from dos

thats about the best way ive seen anyway i just cant figure out how to install dos to the hdd in the enclosure

by peconet tietokoneet

Usually you could just install the disk and just run it.

I can on my laptop, but then i do not go for Sony products.
Tell me, does the disk spin in the cd/dvd drive?

by ic-it

The CD with the ISO will boot up on the desktop or you can run it from the desktop?

If you can only run it, then you need to double click the ISO. Your CD burning software should open and create a bootable CD for you. Then you can try to boot from that CD and install XP normally (i.e. with the hard drive in it's normal bay on the P3.

To install a DOS partition, then copy XP, then install from DOS, you should download a bootdisk with win98SE. Try here;

http://www.bootdisk.com/bootdisk.htm

Fdisk your drive creating a small FAT32 partition (at least 2GB).
Boot with the newly created Win98SE floppy and type this command;
sys c:
Copy over the contents of your XP CD.
Download and copy the smartdrv.exe file to the c:\
Run smartdrv.exe first (it will save you hours of install time).
then run the winnt.exe
let the install do a full NTFS partition on the currently unallocated space.

by strayer

Do you mean an external hard drive? If so, you usually have to remove the internal hard drive to install on the external hard drive.
Do you have a floppy drive? Or can you get an external floppy drive?
With a floppy drive, you can use the WIndows 98 start disk. It's easy to find and download to a floppy.
This will get you into the computer.
There is a help screen.
Drive C: is your internal hard drive. You can run fdisk and this sets up partitions. You can just use the whole hard drive.
Next, you format the C: drive. Follow the help info on this stuff.
You also can load DOS onto the drive. THat's also in help.
I've solved odd problems with the 98 start disk.
I am using an old Vaio and have xp pro and Xubuntu on it.
Let me know if this helps and if not, we'll try something else.

by hdhntrs

my vaio has no floppy drive and i cannot boot from disk either usb or cd so as why to use enclosure

by rob miners

just make sure that you select the right drive. When you run DiskPart type in lis dis to get a list of the drives.

Download DOS7

http://ms-dos7.hit.bg/#msfv

Burn it to CD using Nero or similar.

Ensure that you have an Active Partition on the USB Drive and it is formatted FAT32.

If you only have one Hard drive in the System that you are using when you insert your USB Drive it should show up as Disk 1.

Press the WinKey + r and type cmd and press Enter. Press Enter after each of these commands.

diskpart

select disk 1

clean

create partition primary

Format FS=Fat32

active

Now type

EXIT to exit the diskpart session

Disconnect the Hard Drive from the PC that you have been using. Set it to Boot from CD in the BIOS. Connect your USB HD and turn on the PC. Insert the DOS CD that you created and follow the prompts to install it to the USB Drive. When you have finished installing DOS shutdown the PC and reconnect the Hard Drive.

Restart the PC and reconnect the USB HD, now you will need to copy the entire I386 folder from your XP CD to the USB HD. While you are copying the I386 folder also copy your Antivirus Sofware that you are going to install along with the Motherboard Drivers. You will find the Motherboard drivers on the Notebook manufacturers site. When you have finished doing that, connect the USB HD to the Notebook. Turn on the Notebook and you should end up with a DOS Prompt. Type in CD I386 and press enter. Type winnt.exe and press enter.

by hdhntrs

alright let me get all this together and i'll hit back thanx

by rob miners

if you don't understand something. Make sure that you have the right drive selected as when you run clean it may wipe you out.

by hdhntrs

good thing youy said something

i have 2 hard disks and the usb-which is an actual harddrive in an enclosure

which disk will show as disk 1 again

CANNOT screw up pc disk as i have no way to back it up

by balge

hi
just a quick thought - hard drives often number from zero i.e. first drive is 0, second is 1, third is 2 etc. Just check the size of the drive to identify them.
cheers

by rob miners

has said if you have two internal hard drives the Primary should be disk 0 the Slave should be disk 1 so your USB drive should be disk 2. You can use lis dis to check the size of the drives.

eXample:

C:\Documents and Settings\Rob>diskpart

Microsoft DiskPart version 5.1.3565

Copyright (C) 1999-2003 Microsoft Corporation.
On computer: AMBO

DISKPART> lis dis

Disk ### Status Size Free Dyn Gpt
-------- ---------- ------- ------- --- ---
Disk 0 Online 149 GB 0 B

DISKPART>

Edit: to add

you can run diskpart prior to inserting the USB drive to get a list of the drives. When you insert the USB drive type rescan to redetect the drives. You will have to disconnect both internal drives when installing DOS to the USB drive.

by hdhntrs

wanted to be sure
next problem is i'm not a user of nero and am having a hard time making a dos cd i downloded the cd iso but when i make the image it wont boot-cd is set to first in bios(compaq p3) is this normal and will it work when i disconnect the hard drives

thanx

by rob miners

it wont boot later on. You have to have it bootable. Check these links for instructions.

How to make a bootable CD

http://www.computerhope.com/issues/ch000669.htm

How to Make Bootable CDs with Nero

http://www.wizardskeep.org/mainhall/tutor/neroiso.html

If you think that any of the posts that have been made by all TechRepublic Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D :-bd


How do I rate the answers to my posted Question?
Click on the answer. Click the Mark "Helpful" button displayed below the post. You may mark more than one answer as "Helpful."
The answers only have to be Helpful and don't necessarily have to be a definitive answer.

Edit: second link didn't work

by strayer

I suggest that you open the vaio and remove the internal hard drive.
After that, plug in the external hard drive. See if your XP Home install disk will boot.
If it does, try to partiton and format the external hard drive as usual and do the install. XP Home may not like huge hard drives. I'd put a reasonable size partition at the beginning of the drive.
Try this and see if it works.
You can use Linux to get around XP.
I used an old Debian cd to partition and format a hard drive. I did a Fat 32 format and XP installed just fine.
The XP install disk wouldn't let me install on the internal hard drive.
If you need to do this, I will look for the right download for you.
I'll be back online tomorrow afternoon.
I do legacy tech and have to work on some computers tomorrow morning.

by hdhntrs

i'm kind of teaching this to myself as i go

anyway i had a problem with the internal drive and COULDN"T reinstall windows in the machine

which leads me to my current situation

by hdhntrs

thanx a million you guys i have a rudimentary understanding of all this and it did take me 4 days to get it to all work together but i did it(just need to call microsoft and argue with them about the serial but i easily saved hundreds of dollars thanks to your help (jacky!) if there is a way to give rep on this forum let me know u got it

and thanx to 1b too his ware was way easier to use than nero

i couldn't install dos from the pc with the enclosure but i put the hard vdrive in the note book and booted dos install from the cd drive worked great thanx again

This discussion is closed to new replies.