Discussion Locked

How do I partition a 20.4GB HDD?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to install a 20.4 GB hdd on a old P166 PC. The BIOS only supports a 8.4 GB hd. Where can I get step by step instructions how to partition the new drive?

11 replies

by fenaikh

Vist your manufactorer site or
ontrack.com to know about disk overly.

good luck

Mohamed

by grump

I would suggest you give up the IDEA!.
but you won't so ..

You need the mfg ez install disk that came with the Hard Drive.. ie, seagate , maxtor, western digital.. and use that disk to install the 20 gig hard drive..

it is call using a drive overlay.. (in short, faking out the system). You will need a boot disk for the OS use FAT32. With out the overlay you are only going to get 8.4 gig.. The mfg of the hard drive is critical..

This discussion is closed to new replies.