7 replies
by jswinberlin Accepted solution
by oldbaritone Accepted solution
in Computer Management. (Default is "first available" but you can specify.)
I do this with my removable USB drives. When I plug it in, I know I have the correct one because it gets the expected drive letter.
If it's the wrong letter, it's the wrong USB stick.
by older mycroft Accepted solution
by jswinberlin Accepted solution
by oh smeg Accepted solution
You Can allocate them a Drive Letter or move them to the end of the Chain.
Personally whenever I setup any computer I always move the Optical Drive/s to the last letter/s in the Alphabet and with Removable Media I just set them at the end of the HDD Chain.
So if I have 3 drives in that machine C D & E are the HDD internal and the removable is always F. Doing things that way doesn't produce any real problems till you need to add additional Drives of course but it at least works.
Col
by jswinberlin Accepted solution
To clarify, I want the hard drive to be X. I want to rotate it with another drive that would also be labled X. This way I could tell the backup to backup each day to X and if I rotated them once a week I would have a 14 day backup with 1 week off site.
The server only wants 1 drive to be labeled X. When I put the second drive in and label it X all is good. However when I put the other drive back in it loses the label and labels it the next sequential letter.
by hal 9000 Accepted solution
You can not have 2 drives with the same Drive Designation doesn't matter if they are fitted at different times Windows [b]Can Not[/b] have different drives with the same letter. Even if the drives are identical they will have different Firmware Numbers inside the Firmware/Drive Designation Hardware of the individual drives.
To do this you can not have the drives set to X but only to the next drive letter int he Drive Chain. So that when you remove one drive it frees that Drive letter and then when you fit the next one it takes that Drive letter. Here you need to set the wanted drive letter to the end of the Installed Drive Chain not the end of the possible Drive Chain.
I would suggest moving any Optical Drives to the End of the Drive Chain and using whichever Letter is now at the end of the installed Drive chain to do this.
If you have to stick with the Designation of X you will have to reset the Drive Letter every time you change a HDD.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending