13 replies
by mbarakt
the below link will take to download program go ahead and the prgram name Docmemory also it's free as you want enjoy!
http://download.com.com/3000-2094-1534814.html?tag=lst-0-2
for another free software to www.winsite.com niceone if you've any problem contact me by my e-mail.
thanks.
by haagr
by dmiles
A free software program that will document all info of computer can be down loaded from the following
SiSoft Sandra- free standard version
1)www.zdnet.de/download/library/de00W-wc.htm
2)http://shareware.lycos.com
by haagr
by haagr
by dave.osborne
SiSoft Sandra does show if the memory is SD RAM, DDR RAM, or RD RAM. If you click the mainboard information module which should be the second working module and scroll down, you will find the information you need.
example from running it on thiscomptuer ...
SiSoftware Sandra
Computer System
Manufacturer : Compaq
Model : Evo W4000
Serial Number : V243CCFZA312
Unique ID : BFA54684-11BD55EF-4BD83487-19F28371
System Chassis
Manufacturer : Compaq
Case Type : Desktop
Can be locked : No
Serial Number : V243CCFZA312
Asset Tag : V243CCFZA312
Boot-up State : Safe
Power State : Safe
Thermal State : Safe
System Mainboard
Manufacturer : Compaq
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : 0784h
Serial Number : V243CCFZA312
System Memory Controller
Location : Mainboard
Error Correction Capability : m-bit ECC
Number of Memory Slots : 2
Maximum Installable Memory : 2GB
Bank 1 - XMM1 : JEDEC ID:7F 98 00 00 00 00 00 00 KVR266X72C2/512 00A7140F DIMM Synchronous SDRAM 512MB/72 @ 200Mt/s
Bank 2 - XMM2 : JEDEC ID:7F 98 00 00 00 00 00 00 KVR266X72C2/512 00A5140F DIMM Synchronous SDRAM 512MB/72 @ 200Mt/s
continued ...
by dave.osborne
Flash Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 1
Bank 3 - XU15 : Chip Non-Volatile FLASH 512kB/4
System Chipset
Model : Intel Corporation 82845E Brookdale Host-Hub Interface Bridge (E0-step)
Bus(es) : X-Bus AGP PCI IMB USB SMBus/i2c
Front Side Bus Speed : 4x 133MHz (532MHz data rate)
Max FSB Speed / Max Memory Speed : 4x 133MHz / 2x 133MHz
In Order Queue Depth : 12 req(s)
Chipset Hub Interface
Type : HubInterface
Version : 1.50
No. Ports : 1
Width : 8-bit
Full Duplex : Yes
Multiplier : 1x
APIC 1
Version : 2.00
Multiplier : 1/2x
Max Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : No
Logical/Chipset Memory Banks
Bank 0 Setting : 256MB ECCDDR-SDRAM 8-1-1-1R 6-1-1-1W 2.0-3-3CL
Bank 1 Setting : 256MB ECC DDR-SDRAM 8-1-1-1R 6-1-1-1W 2.0-3-3CL
Bank 2 Setting : 256MB ECC DDR-SDRAM 8-1-1-1R 6-1-1-1W 2.0-3-3CL
Bank 3 Setting : 256MB ECC DDR-SDRAM 8-1-1-1R 6-1-1-1W 2.0-3-3CL
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 1/1x
Refresh Rate : 7.80?s
Power Down Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 1 : Kingston KVR266X72C2512 0F14A700 512MB 18x(32Mx8) ECC DDR-SDRAM PC2100U-233-750 (CL2.5 upto 143MHz) (CL2 upto 133MHz)
Memory Module 2 : Kingston KVR266X72C2512 0F14A500 512MB 18x(32Mx8) ECC DDR-SDRAM PC2100U-233-750 (CL2.5 upto 143MHz) (CL2 upto 133MHz)
Environment Monitor 1
Model : AD ADM1028 SMB
Version : 0.02
Mainboard Specific Support: No
Temperature Sensor(s)
Board Temperature : 33.0?C / 91.4?F td
CPU Temperature : 38.0?C / 100.4?F td
by dave.osborne
AGP Bus
Version : 2.00
Current Data Transfer Rate : 4x
Side Band Enabled : Yes
Fast-Writes Enabled : Yes
Aperture Size : 64MB
PCI Bus(es)
Version : 2.20
No Bridges : 2
PCI Bus 0 : PCI (1x PCIClk)
PCI Bus 2 : PCI (1x PCIClk)
LPC Hub Controller 1
Model : Intel Corporation 82801BA LPC Interface (ICH2 B5 step)
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Random Number Generator Support : Yes
LPC Legacy Controller
Type : SMSC LPC v1
Version : 6D.00
No Enabled Devices : 5
USB Controller 1
Model : Compaq Computer Corp (Now owned by Hewlett-Packard) 82801BA/BAM USB Controller #1 (ICH2/ICH2-M B5 step)
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No
USB Controller 2
Model : Compaq Computer Corp (Now owned by Hewlett-Packard) 82801BA/BAM USB Controller #2 (ICH2/ICH2-M B5 step)
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : Intel 801xx SMBus
Version : 0.05
Speed : 16kHz
Expansion Slot(s)
AGP Slot J40 : AGP-4x 32-bit 3.3V HalfLength InUse
PCI Slot 1: J20 (1h) : PCI 32-bit 5V PME SMBus HalfLength InUse (Intel Corporation 82845E Brookdale Host-AGP Bridge (E0-step))
PCI Slot 2: J21 (2h) : PCI 32-bit 5V PME SMBus HalfLength Available
PCI Slot 3: J22 (3h) : PCI 32-bit 5V PME SMBus HalfLength Available
PCI Slot 4: J23 (4h) : PCI 32-bit 5V PME SMBus HalfLength Available
PCI Slot 5: J24 (5h) : PCI 32-bit 5V PME SMBus HalfLength Available
by dave.osborne
Port Connector(s)
COM A - COM A : Serial Port 16550A Compatible - 9 Pin Dual Inline / DB-9 pin male
COM B - COM B : Serial Port 16550A Compatible - 9 Pin Dual Inline / DB-9 pin male
PAR - PAR : Parallel Port ECP/EPP - 25 Pin Dual Inline / DB25 pin female
USB 1 - USB 1 : USB - USB / USB
USB 2 - USB 2 : USB - USB / USB
KBD - KBD : Keyboard Port - PS/2 / PS/2
MOUSE - MOUSE : Mouse Port - PS/2 / PS/2
CD-AUDIO IN 1 : Audio Port - CD-ROM Sound Input / None
TV & DVD Audio In : Audio Port - CD-ROM Sound Input / None
P20:Primary IDE : None - ATA / None
P21:Secondary IDE : None - ATA / None
P10:Floppy : None - Floppy / None
J13 - Line I/O: MIC : MIDI Port - None / Mini-DIN
J15 - Line I/O: Line In : MIDI Port - None / Mini-DIN
J13 - HeadPhone & Line Out : MIDI Port - None / Mini-DIN
P9: NIC : None - None / None
Chassis Fan : None - None / None
P6: Speaker : None - None / None
Of course you have to install this program, but it does give very good detailed information and it's free.
by haagr
by gkheart1
There is freeware out there that will tell you.
Sisoftware Sandra 897 is what I use. It was a free
download that I burned to disc. It tells you the
following.... Max installable...Max module size..
supported speeds...supported type...suported voltages...And what modules in size in MB are installed now and which banks they are in. Also if
you have any empty banks. You will have to install
the software, However you can then uninstall it when you have the info. you need. I hope this is of some help to you :) gkheartbeat1@cs.com
by haagr
by haagr
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending