Discussion Locked

How to identify an unmarked motherboard

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
how can you identify an unmarked mother board?

7 replies

by jschein

Motherboards are never unmarked...

Usually by the processor, or between the processor / card slots, or between the card slots themselves is a serial or mobo identity #.

If you cannot find that info, you can look into the system Bios... It will tell you the make / model.

If it does not boot, the fun begins... You have to look at the chipset properties on the motherboard, if it is a socket / slot cpu, and any other chipset identities... Then you must use a search engine like google and do a search with that info (i.e. SLOT A+SIS8897+VIA36 )

Good luck.

by kc 1

With regards to the searching aspect instead of using google go to motherboards.org and in there put your chipset properties egSLOT A+SIS8897+VIA36

by thechas

Many motherboard are not marked, but a lot are.

Look at the outside of the outermost card connector for a label. That is the common location.

Next, if you can power it up, copy down the BIOS string that shows up near the bottom left side of the screen during the memory test.

With this, you can use the tools at either www.motherboards.org or www.wimsbios.com to ID the board.

Now, most manufactures ONLY support their retail products. If the motherboard you have is an OEM board, your only source of support will be the original manufacture of the PC it was made for.

I have also noticed a number of manufactures web sites dropping links to information for older motherboards

Here is a link to a TR article on identifying a motherboard:

https://www.techrepublic.com.com/5100-6255-1041092.html

Chas

by ron216

Try the FCC number. Most all boards have this number.
search for the federal communication commision.

by imbpc

if the computer is up and running download a small program from www.cpuid.com called cpu-z this should tell you every thing you want to know

This discussion is closed to new replies.