to boot from the CD/DVD as first boot device. You may have to have the Sata drivers for XP to see the Hard drive.
How to dual boot Vista and XP (with Vista installed first) -- the step-by-step guide with screenshots
http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm
This is how you do it but you will have to find out the Motherboard specs for the Sata Driver. Check the Make and Model of your System and do a Google search for the drivers or post the information here so that a peer may be able to help you track down the drivers.
Extract and Copy the SATA Drivers to a Floppy Disk. Boot from the XP CD and when prompted, press F6 to install the SATA drivers from the floppy disk. If you haven't a Floppy Drive Slipstream your XP installation with the SATA drivers.
How To: Slipstream your XP installation
Download nLite
http://home.midmaine.com/~nlite/nlite/nLite-1.4.8.installer.exe
http://www.nliteos.com/guide/
These are the steps that I took and if you have any problems read the guide.
Download the Sata Drivers from the manufactures web site.
Install Nlite
Extract the Sata Drivers to a folder named Sata using WinRar. http://www.rarlab.com/download.htm
Copy the entire XP CD to a folder named XPS
I then ran Nlite and Browsed to the XPS folder, click Next, click Next then select the Drivers and Bootable ISO click Next.
At the Drivers Tab click insert, click single driver and navigate to the folder with the .inf file for windows XP.
Highlight it and select open and select next. Select Textmode driver and select the XP Sata driver and click OK.
Click next and Yes to apply changes, next and select Make ISO. Burn it to CD using Nero or any other Software that will support the ISO Image.
How to burn an ISO Image:
http://www.ubcd4win.com/burn.htm