Question Locked

how to install windows xp on a scsi disk

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
the installation will not reconise that the workstation has a hard disk

3 replies

by ---tk---

Place them on a 2.5 floppy disk (put it in the machine), when your loading the OS, you will see a prompt to hit F6 to load RAID/disk drivers. Hit F6, load the drivers (from the 2.5 floppy), and continue on with the installation. If you still do not see the drives you loaded the wrong drivers. Best of luck!

by oh smeg

You copy these tot he Root of a 2.5 Inch Floppy and when the first blue screen on the Windows Installer appears press the [b]F6 Key[/b] and wait till you are prompted then insert the Floppy and press Enter.

If you don';t have a floppy drive you can make a Slipstreamed Install Disc by following the directions in this TR Article

http://articles.techrepublic.com.com/5100-10878_11-5630356.html

Downloading the same article from here

http://downloads.techrepublic.com.com/abstract.aspx?docid=172974

Or using a product like nLite

http://www.nliteos.com/download.html

If you chose to use nLite make sure to read the directions for use on their Web Site located here

http://www.nliteos.com/guides.html

Col

This discussion is closed to new replies.