Question Locked

How to interpret SpeedFan results?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

Would you help me interpret the data I obtained from SpeedFan?

I hear a humming/buzzing sound whenever my Compaq Presario (Model # 1516US laptop system, running WinXP Home) has been running for a while. Also it gets quite warm.

The CD/DVD ROM drive in it died recently.
(1) the system fails to play any DVD/CD;
(2)right-clicking on "My Computer", then "Eject" does not eject the CD
(3)running the HP Diagnostics tool gave an error message:
Combo1: Sequential Read Test:test failed, error code: 066003001).

I want to be sure I'm not killing the system slowly. So I ran SpeedFan and got the data shown below.

Fan1: 0RPM
Fan2: 0RPM
HD0: 40 - 49C (depending on how many other programs are running)
Temp1: 63 - 72C
Temp2: 26C

Is this normal? Should I interpret the 0 RPM values for the two Fans to mean that the fans are not running properly? (I do hear a humming/buzzing sound!) The values are not very different when I use a Vantec LapCool pad underneath my system!

Thanks for your help.

Ranga

Thanks for your help.

Ranga

3 replies

by thechas

First off, you are running a desktop application on a laptop. You can expect to have some issues with the reported data.

The fans on your laptop likely do not have speed sensor circuits in them and thus the speed of the fan cannot be read by the software.

Of the temp readings, the one that bothers me the most is Temp 1 at 72?C. Even if that is the CPU core temp, that is hotter than you want it to be.

Unless you suspect that the fans in the laptop are bad, your best option is one of the laptop coolers. The cheap one's use a plate and some fans to draw heat away from the bottom of the case. The more expensive one's use Peltier junctions to actually cool the case down.

And yes, excessive heat could be why the optical drive has failed.

Chas

This discussion is closed to new replies.