Discussion Locked

How to make a low -level format

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have heared that it can be done through the BIOS, it is right?

P.S. BUT I can't find anything like low-level format in my BIOS.

7 replies

by ntoz

Low level formating in Bios is generaly the function of a SCSI hard drive.

by techv

hi,
make a windows95/98 bootable,copy the file "debug.exe" from "\windows\command" subfolder of the same sytem into that bootable you made, start the PC with that bootable and on command prompt which you got using bootable type debug and press enter key and type the following :
Type the following bolded text only. You will receive an error if you type anything other than the bold text. The non-bolded text represents what will appear on your screen once you press [Enter] after typing each command.

-F 200 L1000 0 [Enter]
-A CS:100 [Enter]
xxxx:0100 MOV AX,301 [Enter]
xxxx:0103 MOV BX,200 [Enter]
xxxx:0106 MOV CX,1 [Enter]
xxxx:0109 MOV DX,80 [Enter]
NOTE: ( -- "80" for hd 0, "81" for hd 1 )
xxxx:010C INT 13 [Enter]
xxxx:010E INT 20 [Enter]
xxxx:0110 [Enter]
-G [Enter]
"Program terminated normally"
Turn off the computer. On the next startup the hard drive will need to be partitioned and formatted.

This discussion is closed to new replies.