Question Locked

How to Make XP on Dell D630 sees both SATA 1.5 Drives

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My Dell D630 NB is configured to boot from either of the internal SATA or from the expansion bay drive by changing the boot order via BIOS, under Boot Sequence. I can boot to either the expansion bay drive or from internal drive by changing the boot order. After booted up, the then active OS (XP Pro, Vista Ultimate, W2K3EE-X64, RHEL 5.1 with VMware WS) can not see the other SATA drive. The BIOS' On Board Devices' SATA Operation is set to AHCI (instead of ATA) and Module Bay Device is Enabled. Both SATA drives was only visible to each OS during the initial OS installation. Rescan the bus on each booted OS did not help.

I believe since both drives are SATA which is point-to-point, only one drive can appear, hence the BIOS boot order control which one to be visible first to the BIOS. Is there any way I can make the second SATA drive visible to the OS running on the first drive (regardless of order)?

Do I have to use one SATA drive and one ATA (PATA) drive in order to see both at the same time?

Thanks for any recommendations or hints.
Regards,

6 replies

by seanferd

Windows can't see a Linux partition. In Linux, you need to mount any other drive to see it. RH5 is pretty old, and I don't think it can see NTFS partitions, but newer Linux distros can.

Can you "diagram" which OS is on which drive for us?

There are other issues I've seen with SATA configurations, but we can get into that after we have more info available.

by khongphutu

Both drives are SATA 1.5 drives. Both drives are boot drives. Their differ only in drive speed (5400 vs 7200 rpm).

Drive 1 has dual boot options to RHEL 5.1 or Other OS (default is Other OS if timed out). If other OS is chosen (or timed out), it then load Windows OS loader to allow multi-boot options to either WinXP Pro (default if timed out) or Windows Server 2003 Enterprise Edition X64 w/SP2. All OSes are in English, no localization.

RHEL 5.1 is the latest, up-to-date RedHat Enterprise Linux Server (RHEL)as of today 13 Jan 2008 (Western solar calendar/Gregorian calendar). This is NOT a free Linux distro. This is not the free Fedora Linux distro either. I have other means to mount UNIX drives in Windows and I can mount and read Windows partitions on RHEL 5.1. I can see, read, and write data from RHEL onto my Windows partitions as long as the partitions are from the same SATA drive.

Drive 2 has default boot to Windows Vista Ultimate. It has remaining spaces that I want to use as DataStores for my Vmware Virtual machines, which runs on VMware WorkStation which in turn runs on RHEL 5.1 on drive 1. Furthermore, I want to be able to share data in my DATA1 partition in drive 1 with my DATA2 partition in my second drive (both are formatted to NTFS 3.1 and is compatible across XP Pro, W2K3, and Vista)

Right now if I booted to any aforementioned Windows version, Windows sees only the drive it's booted from. It can't sees the 2nd drive. This is at the hardware level, not at the OS level. It has nothing to do with mounting partition. It has to do with with the SATA interface as implemented by Dell which I am currently still in learning mode. I had no problem with a similar setup on another NB when both drives are ATA drives; just with the case where both drives are SATA.

I've tried searches on Dell website and googled but can't find much relevant info on this subject, and on the internal working of the SATA controller.

The SATA drives comes with a jumper, which according to Seagate is used only for servicing only. I've tested the 2 cases:

a. Both drives without jumper.
b. Drive 1 (int) w/o jumper and drive 2 (expansion bay) with jumper.

The tests were unsuccessful in making Windows on one drive sees the other hard drive; even with a rescan.

Thank you very much.

Regards.

by khongphutu

I found a lesser desirable work around solution. This involves disabling FCM (Flash Cache Module) then reverting the SATA device setting from AHCI back to the ATA mode.

Thank you.

Regards,

by seanferd

First, I am sorry I did not understand your reference to RHEL. You did not specify "server", which is at version 5.1 now. If I am not mistaken, there were always paid-for versions of Red Hat.

You also need to enable SATA and RAID in BIOS and probably in all Operating Systems.

You may also need to find out who made your SATA/RAID and get the latest drivers (even if the system is brand-new). This apparently is a major issue, even with high-end machines. Every controller does not recognize every drive yet, at least without updates. Sometimes the drive manufacturers have updates also.

edited for clarity

This discussion is closed to new replies.