Discussion Locked

How to open a second CD drive when boot

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

NRGeti (Programmer) Sep 19, 2002
I need help setting up my PC to read a DVD Drive from DOS. My goal is to
install Windows XP in a dual-boot system.

Background:
1. Windows XP on a DVD CD.
2. First CD drive is RW; second is the DVD.
3. Partition Magic to create the Primary partition for
XP.
4. To install XP I must boot my PC into DOS and read it on the DVD drive.
5. My thought was to edit the config.sys and autoexec.bat files on the
Partition Magic Boot Floppy Disk to set up the driver for the DVD. So far I have added the ASPIxxxx drivers (but I am not sure
which one is needed for DVD) to the config.sys and MSCDEX to the autoexec.bat.

When I boot from the floppy disk, the system finds the first CD drive just
fine but now how do I tell it to point to the second drive which is the DVD
I need? Is there some other way to install XP into the empty Primary
partition?

3 replies

by thechas

What is your other operating system?
If it is another version of Windows, you should be able to install XP from within the GUI.
Using the custom installation options, you will be able to set up XP to automatically Dual-Boot.

Next, why not use the CD-RW drive for the install?
Is there some reason that you need to use the DVD drive as the source drive?.
If you really need to use the DVD drive for the install, just unplug the cables form the CD-RW drive.
You can change the drive letters inXP latter if you want the CD-RW drive to have a lower letter than the DVD drive.

Chas

by nrgeti

Your comments about installing XP directly inspired me to just do it and it worked out well. No where in the documentation that I had did I read about the options available but once XP was installed I found the relevent help.

The reason for the DVD is that the CD from Microsoft is of that format. In any case I figured out how to get to the DVD drive: Starting with the Win 98 rescue disk, I found a series of device command in the config.sys and determined that only the last one takes and replaces the previous ones. All I had to do was test each one until the DVD drive to open.

This discussion is closed to new replies.