16 replies
by melmellcc Accepted solution
by systemcheck Accepted solution
there is a small hole near the eject button, straighten out a paper clip and just give it a good poke that will manually override to open it. sounds like the eject motor could be out, just a small hassel
by melmellcc Accepted solution
by pshiflet-24 Accepted solution
There should be a small hole in the CD drive cover near the eject button. You can straighten a paper clip and insert it into the hole. This should manually open/eject the drive tray. Let me know if this helps, isn't quite clear, or you have further questions.
Thanks.
by melmellcc Accepted solution
by pshiflet-24 Accepted solution
It would seem that a part of the electronic eject is not working properly or retracting enough to release the drive tray. I am not extremely familiar with the inner workings of laptop eject button mechanics so I can't really be too specific other than to say that a replacement drive probably wouldn't be too expensive if the manual ejection process is too cumbersome.
As I have seen a similar issue with a Dell Inspiron 1526, fussing with it may "magically cure" the problem. It may also just finish breaking it for you. Though I doubt this helps, sometimes small plastic pieces cause larger electronic devices to be useless. Sorry.
by seanferd Accepted solution
Does it sound like it is trying to open, or does the tray move just a bit? Could be a CD caught inside. Otherwise, the mechanism may be broken or the motor fried.
Look at the edge of the tray - do you see a little pinhole? If so, straighten a paperclip and push it through the hole to pop open the drive. Probably best to do this with the system powered off.
You can also check the manufacturer's website for possible info.
by melmellcc Accepted solution
by seanferd Accepted solution
Or it may be dust caught in a mechanism, or lubrication gone tacky. Hard to say without looking at it, there are so many configurations for this stuff. Just check for signs of these things. With the whole unit out, open and close the door, looking for the hangup.
If you know someone who likes to take such thing apart carefully and methodically, and has a high success rate of actually putting them back together... Otherwise, most shops will just tell you to get a new drive.
Good luck!
by systemcheck Accepted solution
by oh smeg Accepted solution
But none the less they are fairly easy to replace and they are not worth messing around with. If a Paperclip opens the drive either a spring has come off or the tray is jammed in the In Position.
Either way it's not a fixable thing so just price a replacement DVD Burner to fit to the unit and fit it. ;)
Col
by melmellcc Accepted solution
by melmellcc Accepted solution
by melmellcc Accepted solution
I also foung out when the drive was opened, there's a broken side near to the latch. that's probably why it doesn't eject. So sad to see it. I called the company selling it and they're going to send a new one. I just hope it will arrive safe.
by seanferd Accepted solution
by oh smeg Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending