Discussion Locked

How to prepare old PCs for disposal?

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a truckload of old electronic equipment that will be picked up for recycling the week of January 21.

We need to erase/remove/destroy the data on all PC hard drives prior to disposal. The data is not necessarily private or confidential, but at the same time it should not be avilable to the public.

Most of the PCs are Windows 3.1 (some only have DOS and a couple machines have Windows 95).

What would be the most effective way to accomplish this task?

Thank you in advance for any suggestions!

13 replies

by ann777

As always, please remove any embedded spaces from the above links when pasting into your browser.

by syscokid

Make a boot disk and add the format.exe to it if it's not there by default.

Craete an autoexec.bat on the boot disk with the command

format C: /u

(also /s if you want the drive to be clean but bootable).

Make a bunch of copies of the boot disk. Plug in your old equipment, put the disks in, turn the machines on, and wait.

by thechas

Even the /u format will not prevent recovery if someone wants to put a lot of effort into the task.

Use fdisk to remove the partition(s).

Reboot, and use fdisk again to repartition. the greatest security, is if the new partition(s) are a different size than the original. That way, there is now way to recover the old MBR and retrieve files.

by saihib

Do what we did at my company. Get a powerful magnet and set it on each hard drive for about 20 seconds. This will scramble the data beyond recovery.

by saihib

The magnetic layer on a disk already has millions of individual domains ? tiny magnetic fields produced by small clumps of atoms. By sweeping a stronger magnet across the domains, those polarities can be read or switched, depending on the proximity of the magnet. Thus, a computer can both read and alter the data on a hard drive.
This, of course, is why bringing a magnet close to your hard drive or floppy disk can be fatal to data. The strong domain of even a common household magnet can wipe out the carefully altered domains, effectively turning a string of ones and zeros into a uniform pattern of ones

by jereg

I suppose it depends on how much toruble you want to go to, and whether you want these pc's to be used again. All of the answers are effective to some degree, but with enough work some data might be recovered, (why anyone would go to that trouble, Icouldn't tell you). I took a class with someone from the FBI, and the way they disable there hard drives is to punch a hole in the HD. through the case and the disk. Most of us don't have a hole punch that strong sitting around, but if you get a small,2 lb. or so, sledge hammer and beat on the HD a couple of times, it won't be used again. It's faster that a reformat, good exercise, and releaves some built-up tension.
Good Luck.

This discussion is closed to new replies.