19 replies
by cbaisden Accepted solution
by hal 90000 Accepted solution
Edited by moderator
Message was edited by: beth.blakely@...
by why me worry? Accepted solution
by danke Accepted solution
by hal 9000 Accepted solution
by downrighttired Accepted solution
by roberta3002 Accepted solution
Hi,
I guess you don't have a SCSI HDD.
How to connect cables depends of your new PC motherboard PATA or SATA I/O connectors and hardisk interfaces... there is any single answer.
Shortly - you have set your new (boot) drive as a master and old drive as slave or secondary drive.
With a newer motherboards it's in the mobo BIOS which drive is 1st and booting drive ...
Normally there isn't danger to loose data from your old drive until you don't try to boot from it. But if there were problems with your old HDD and your info is really important, it may be wise to leave this job to professionals.
by why me worry? Accepted solution
by carlsmorris Accepted solution
by locolobo Accepted solution
Did I spell that right? Just a little song.
In my case it might be correct since I did click the link! LOL
by hal 9000 Accepted solution
Actually Max has been positing this link for a long time and it's harmless. Honest. :0
This clown attacked Beth who is just doing her job so I offered that it try someone it's own size apparently it's taken up my offer and is trying to make people think that It's me. :D
It will not do you any harm really. But that's a good idea maybe I should create a link that will trash the clowns computer and that will make then stay away for a while till they manage to get it reloaded and there may be some explanations called for as it's only posting Monday to Friday US Time so it looks as if it's posting from a work computer. Trash the work computer and then allow them to explain why it broke what a good idea. :^0
Sounds like Spuddy M all over again. :0
Col
by downrighttired Accepted solution
by hal 9000 Accepted solution
To impersonate me is only posting during US Work Hours. Currently there has been a rush of Trolls posting here to just disrupt the site and generally cause havoc.
The URL that I posted above is harmless except to the fools who continue to cause trouble and can not do any harm at all to any Windows Install as presented here.
But it's likely to make the Trolls burst into tears when they realise that someone has got their mark and is hitting them back at their own level of understanding. :D
Col
by hal 9000 Accepted solution
I would suggest that you don't try to fit the drive to the new computer as there may be some problems associated with fitting it that could cause the new unit no to boot.
Fit the HDD to a USB Caddy and you'll need the right type of Caddy either an IDE one so if your HDD has 2 Rows of 20 pins that's an IDE Drive or sometimes called a PATA if you have a single flat connector with 7 connectors in it on either a Red, or Grey data lead you'll need a SATA USB Caddy.
If you have an IDE Drive set the jumper to CS [i]Cable Select[/i]and just plug in the IDE Cable and Power Plug then close up the Caddy. You can then put the power adaptor into a mains socket and the USB Lead into a empty USB Port or if you have used every port you can use a USB Hub to give you more available USB Devices. Remember that you can add up to 127 USB Devices per USB Port.
As for recovering your data if you had a Password on the old System you'll need to [b]Take Ownership[/b] of the files by following the directions here
If you had Windows Encrypted File System enabled you'll also need to take a copy of the Encryption Key by following the directions for XP here
[i][u]Now for the problem if your new computer is running Vista I don't know if you can use the Encryption Key on the Vista System so if you have access to a XP Pro system you can use it there and then save your data unencrypted or you may wish to ask the M$ supported Vista Users Community here[/i][/u]
The problem with Vista is that it's still too new to be useful and that there are so many different versions of it that you may have a version that doesn't support Encryption so unless you have the Ultimate or higher copy of Vista I don't think that any of those support the Windows EFS.
I hope that is of some help to you.
Col
by downrighttired Accepted solution
http://www.huhcorp.com/
if not you probably should, or maybe their affiliate http://www.duhcorp.com
by hal 9000 Accepted solution
Many months ago when there was limited space for answers we all used the Tiny URL to cut down a URL from several hundred characters to 24 which left us that much more room for helping people out.
Now that TR has removed the 2000 charter limit those of us who used to use the Tiny URL still do as it's convenient and allows you to preview the link if you so desire.
You can find all the information here
You'll see that it's a real site without any thing wrong with it except it cuts down the long URLs that used to cause problems here when spaces where inserted. Maybe some of us still do not fully trust TR not to get things wrong again.
As I've been locked out for 24 hours I don't see that changing in the short term either. :D
Col
by grassiap Accepted solution
if you are really not confortable with the (small but still existing) risk of corrupting your data, plug your old disk as an external USB device.
Downside is that you use one USB port and that your HDD speed is likely to be slower than if it were inside the computer.
The upside is that this is risk free, and that should you wish to move/travel with your data you have a small mobile storage.
Make sure that you purchase a USB 2.0 capable enclosure, price should be from $ 35 to $ 80.
find the right form factor for your old HDD (standard 3"5 for a desktop, 2"5 for a laptop)
take the HDD out of your old computer, put it in the enclosure.
start your new computer and plug the usb drive.
and voila
HTH
Philippe
by downrighttired Accepted solution
by shellbott Accepted solution
xxxx
Message was edited by: beth.blakely@...
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending