Discussion Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I change the setting to black and white or fast mode, the ink cartridge light comes on and it wont print. Any suggestion?
2 replies
What I would try, if you still have the printer, is to get a new black cartridge. HP printers have a nasty habit of telling you specifically that you have a bad cartridge, they give little hints, such as your problem. The problem that I have seen the most is that the printer will act like it is going to print, but never does. I have seen them tell you there is a bad connection between the cartridge and the printer, but in general the printer will do something that seems to defy logic. Hope this helps!!
by hloke
Need to confirm few things before a right suggestion is given.
1. Which cartridge is currently installed in the printer? Black or color cartridge?
a. Black - the light indicate that the cartridge is faulty or out of ink.
b. Color - please replaced it with black cartridge. If not, it will not print because you have selected the setting for B&W.
2. Is the carriage contact point clean?
3. If the cartridge is black and new, most probably the carriage has problem.
Hope this is helpful to you.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies