Discussion Locked

HP 840C USB problems

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have n HP 840C, which works fine using the parallel port. I have a black laser on that, so I moved the 840C to the USB port. It prints text ok, it also prints low-res colour ok, but try to print a page at photo-quality and it prints 70% of the page fine, then stops with an 'unable to communicate with the printer' message. I am using the latest drivers from the hp web site, (PC has 128m Ram, 400mhz chip, 30 Gb h/drive)
Can anyone help please?
thanks - Paul

7 replies

by csmith

This is usually overheating. (In the Printer, or Printer Power Supply)
If there is no way to prevent this, you may have to "Jury Rig" the situation, by installing a LPT card, so you can connect it to a Second Parallel Port, and the printer will runslower.
Regards, Chris

by paul

Thanks for the reply Chris, but I am getting OK printing of text and low-res graphics, even after fail of hi-rez printouts, so I feel that my problem is in the area of memory settings/ HP's poor USB support on the 840C. They admit that their USB drivers do not support bi-di communication for Win 98. I'm amazed it works at all! thanks again, Paul

by p.i.b

HP printers usually require the parallel driver to be uninsatlled before adding the USB. Check the driver notes but on some models you are prompted to plug in the usb cable or it simply does not "see" the printer. Most HP CD's have the uninstall utility, suggest you download the latest driver, uninstall the existing and follow the read me notes. Hope this helps. Paul B

by paul

Hi Paul,
sorry but I went to the HP website first, downloaded the latest driver, as I said in my help request, then uninstalled the parallel driver and installed the new USB one as per the HP instructions - it does work, but fails 70% through a print on photo quality - it works fine on all else. The USB shows up fine in system drivers.

Thanks,

Paul

by csmith

Paul,
Yes USB is a real problem, not just for HPs.
I can tell you plenty of horror stories about getting early USB (166-200Mhz) PCs to work with USB peripherals.
The next suggestion is, of course, that you have a buffer overflow, which of course,hangs up the printer driver.
We normally equip Photo Editing PCs with 512 MB Ram. (256 MB SIMMs are about $40 US, so that is $80 for Memory.)
Windows has Memory Management problems over 512, and a software patch is required, or you have to turn off Virtual Memory.
If you are going to be working with Hi Res Photos, I would suggest buying more memory, now, unless you can wait several months, because the disaster we have had over here, is creating a spike in demand for replacement PCs, both newand used.
Regards, Chris

by paul

Sorry for the delay in responding Chris. Thought your advice a possibility, so I bought a 512Mb, didnt work and I am waiting on the 2 x 256Mb to replace it. Meantime I have gone back to parallel - works fine but need to swap leads to use my laser!
Thanks,

Paul G

This discussion is closed to new replies.