7 replies
by nccmbc
Technical support from the Web Site:
Q. Can I run Easy CD Creator and DirectCD for Windows on the same computer?
A. Yes. Just remember to eject any DirectCD discs from your CD recorder before you try to use Easy CD Creator.
Got to the website and get the patch for your version.
http://www.roxio.com/en/support/ecdc/ecdc4vhist.html
Try contacting Roxio if this doesn't help, it may be a specific problem or one not listed.
http://www.roxio.com/en/support/options.html
by pcross
by kth11
I would run an msconfig from the START-->RUN menu then select selective start-up. Next uncheck if not already unchecked process autoexec.bat and process config.sys. Next select the startup tab and uncheck everything but system tray, and scan registry. Reboot then try to burn a cd using ezcd. If this doesn't fix the problem e-mail me I have more info that it could be.
Kevin
HP cd writer support agent
by pcross
by kth11
You might try sticking the cd-writer on the secondary slave setting. Does your software install all the way, or do you get a blue screen or a lockup? If it is a blue screen it points toward conflicting vxd's. I would suggest calling hp cdwriter support. Are you running norton anti-virus software while installing the software? If so it causes an error, it thinks that the install is a virus. You might check on www.hp.com to see if there are any firmware updates to fix this problem. You might also copy the disk to your desktop and try installing it from safe mode, this may take longer but in safe mode there are less drivers to contend with.
Hope this helps some,
Kevin
Hp Cdrw Tech
by pcross
by pcross
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending