Discussion Locked

HP DAT24i tape drive problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Our tape drive has gone screwy. I've tried half a dozen tapes, they all do the same thing. The tape loads, then makes a bit of a clicking/grinding noise, then the orange (clean) light starts blinking, and the tape gets spit out. Backup job fails. I clean it, the orange light stops, but does the same thing when I try again. Any suggestions would be welcome. We're nearly two weeks without a good backup!

5 replies

by dforcey

If this happened all-of-a-sudden, then I'd doubt that this will work, but try it anyway: run the cleaner tape 5 times in a row. If that doesn't fix it, try pressing the eject button 3 times to reset the drive. If not that, I'd update the firmwareon the unit - check HP's website. Finally, try reinstalling the unit with the most recent drivers; something may have gotten corrupted. If it still doesn't work after that, it needs to be pulled and sent in for service.
HTH

Dave

by it admin

well to me my frined it seems you have a big problem, From what you have described it seems that the drive has some mechanical problems.
So now you have two options either take the unit to an Hp resller or dealer for maintanace or else start seriously thinking about getting a new drive.

This discussion is closed to new replies.