2 replies
by softcorp.us
Hi Nancy,
This indicates that the printer's feed sensors have detected the paper to be of a different physical size than is supposed to be in that bin. If the correct paper is in the bin, this is likely caused by a bad paper feed assembly or misaligned feed/registration sensors.
Basically, there is something physically misaligned inside the printer. Carefully place the paper in the bin and ensure only one sheet is feeding at a time. If the problem persists, you'll need to troubleshoot the paper feed mechanism yourself, or take it in for service.
Sorry for the bad news...
Did this help with your problem?
-----Steve Jackson
CEO/CSA
Software Corporation (Softcorp)
http://www.softcorp.us/probono
Advanced pro bono tools and utilities free for personal use
Hi the most common problem on these is the paper feed roller if this slips on the paper onnce the front edge has gone past the paper feed sensor then the unit thinks the paper is longer than it actually is.
This roller can be seen if you take the paper tray all the way out and then look into the slot where the tray is removed from and you will see the roller top centre near the front.
Rich
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending