1 reply
by ann777
This is a partial answer (I do not have the manual for this particular model of printer). There's nothing in the manual for the 184 error, but the 79 has the following:
All Printers:
1) Check the software; drivers; memory PCAs; font, macro, or personality; cartridges; and optional I/O cards. Check the toner cartridge for defects.
2) Remove any accessories (such as font cartridges, memory PCAs, and Simms) that are plugged into the formatter PCA; reprint the file. If the problem persists,verify proper setup with the application vendor.
3) The formatter PCA is defective.
a 5Si giving this 79 service error:
1) power cycle the printer
2) Reset or replace the interface cable; power cycle the printer.
3) Remove SIMMs one at a time and power cycle the printer.
4) Remove the MIO card(s) one at a time and power cycle
5) Try using the parallel interface, if possible
6) With the MIO cards out of the printer, perform a cold reset
7) If the error continues, replace the formatter PCA. Write down the page count and serial number
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending