Discussion Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Printers are ejecting a blank page when the pc is started. I already installed new drivers and it only stopped temporarily-HP 660C and 950C. Any suggestions?
3 replies
by dsmacdo
Hi,
As you don't provide many details regarding either the PC hardware involved or the OS, allow me to suggest that you have a look in the bios to see whether you could change the LPT port protocol.
I would reduce the setting to Standard (SPP). The other item I would try, is a different printer cable. Hp printers tend to require high quality or even special pin-outs. I would also suggest that the cable be no more than 6 feet long for the purpose of testing to eliminate the possibility ofa timing (response) issue.
Hope this helps,
Doug
by rrankey
Poster rated this answer
by rrankey
This question was closed by the author
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies