Discussion Locked

hp surestore f/w upgrade

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to upgrade the firmware on two different HP SureStore DAT24i internal drives that are installed in a HP NetServer. The servers is running are running Netware 5.0. The upgrade must be performed in DOS. Does anyone know how to perform this in aNetware 5/DOS environment? I need to get a 3MB file onto the DOS partition somehow. All suggestions are appreciated. Thanks.

5 replies

by dirk.deprest

You've got
- PC Anywhere for DOS and copy it with a parallel cable.
You can download a Demo
please go to http://www.symantec.com

- Laplink for DOS also with a parallel cable.

I think with the programs that shown above you'll get the best results

Regards

Dirk

by estebandelatorre

Hi, give and advice on why are you upgrading the HP (I have five of that units)
1.- Copy the file to the sys root volume, and then load netbasic.nlm, and then shell.nlm. You will be in a dos like screen, simply copy from sys:\flash to c:\flash
2.-Move the file to a cd rom
Boot from diskette, with dos cd rom drivers loaded, the move the file from cd to c:

This discussion is closed to new replies.