Press the WinKey + r
type cmd and press Enter
type tasklist /m ntdll.dll and press Enter
You should receive a list similar to this
Image Name PID Modules
========================= ======== ============================================
smss.exe 404 ntdll.dll
csrss.exe 500 ntdll.dll
wininit.exe 544 ntdll.dll
csrss.exe 560 ntdll.dll
winlogon.exe 604 ntdll.dll
services.exe 624 ntdll.dll
lsass.exe 648 ntdll.dll
lsm.exe 656 ntdll.dll
svchost.exe 800 ntdll.dll
svchost.exe 864 ntdll.dll
svchost.exe 904 ntdll.dll
svchost.exe 992 ntdll.dll
svchost.exe 1016 ntdll.dll
svchost.exe 1036 ntdll.dll
svchost.exe 1200 ntdll.dll
SLsvc.exe 1216 ntdll.dll
svchost.exe 1336 ntdll.dll
svchost.exe 1436 ntdll.dll
aswUpdSv.exe 1572 ntdll.dll
ashServ.exe 1588 ntdll.dll
spoolsv.exe 1840 ntdll.dll
svchost.exe 1864 ntdll.dll
svchost.exe 848 ntdll.dll
svchost.exe 1520 ntdll.dll
ashMaiSv.exe 1444 ntdll.dll
ashWebSv.exe 2076 ntdll.dll
taskeng.exe 2120 ntdll.dll
taskeng.exe 3472 ntdll.dll
dwm.exe 3504 ntdll.dll
explorer.exe 3612 ntdll.dll
MSASCui.exe 3960 ntdll.dll
ashDisp.exe 3324 ntdll.dll
wmpnscfg.exe 1988 ntdll.dll
wmpnetwk.exe 2524 ntdll.dll
SearchIndexer.exe 3684 ntdll.dll
SearchProtocolHost.exe 3652 ntdll.dll
svchost.exe 1304 ntdll.dll
infocard.exe 960 ntdll.dll
notepad.exe 3204 ntdll.dll
iexplore.exe 3648 ntdll.dll
iexplore.exe 4056 ntdll.dll
iexplore.exe 2556 ntdll.dll
cmd.exe 2952 ntdll.dll
notepad.exe 1632 ntdll.dll
WmiPrvSE.exe 2956 ntdll.dll
SearchFilterHost.exe 2928 ntdll.dll
tasklist.exe 3368 ntdll.dll
If you don't, get this output then the file is probably corrupt. Let me know if this is achievable, (if you can do it).
You can replace the file by following these instructions.
Insert your XP CD and when you see ?Press any key to boot from CD? press a key. Now wait for the XP installer to finish loading up and you will be presented with the option to press R to Repair.
Press R.
The next screen will ask you which Windows installation you would like to log on to. Normally the following will be listed:
1: C:\WINDOWS
Press 1, then Enter to continue.
You may now be asked for the Administrator password. If you know this type it and press Enter. If you don't know the Administrators password it may be blank. Just press Enter or type your username and password.
At the command prompt type these commands and press Enter:
cd %systemroot%\system32
First, rename the damaged or corrupted file so that it is not deleted when you copy the original file. To do this, type the following command:
ren ntdll.dll ntdll.BAK
Next, restore the original ntdll.dll file from the Windows CD to your computer. To do this, type the following command:
copy [CD drive letter]:\i386\ntdll.dll %systemroot%\system32 /Y
Note In this command, replace [CD drive letter] with the letter of your CD drive, such as D.
To exit the Recovery Console and to restart the computer, type exit at the command prompt, and then press ENTER.
Important We recommend that you run Windows Update after you restore a file by using Recovery Console.
Let us know how you get on.