Discussion Locked

IBM & MAC Printer Sharing

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Do they make a switch that will allow a Parallel Lexmark printer to be shared between an IBM and MAC P.C?

6 replies

by vegatecgroup

There is a simple mechnical switch that usually costs less than $40. You will need two dual head DB25 cables to hook the computers to the switch and a regular DB25/Centronics Parallel cable to attach to the switch and the printer. This switch will completely disconnect the printer from one computer and connect it to the other. Just make sure you have the drivers set in each computer for the printer. There are other ways, like through an ethernet network, autoswitches, etc, but this method is the easiest and cheapest. You can buy these switches from any local computer store, major retailer(Like "Best Buy"), online computer store, etc.

by vegatecgroup

One added note. Some of these switches may be configured to handle either one printer and two computers or two printers to one computer. There are also multiple hookup switches for more than two computers/printers. In either case you will need the appropriate cables for each situation.

by wlbowers

Macintosh doesn't have a parallel port.

The easiest way is to put the computers on tcp/ip and put the printer on a printserver.

SMC has a gateway router that is fairly cheap, does DHCP, is a printserver for parallel, and has a 4 port switch.
Good Luck Lee

This discussion is closed to new replies.