5 replies
by hal 9000
Well personally I would go with IBM as they are just better and offer a far better service for their products. As well the new IBM Blades can be stacked with very few wires hanging out the back so this is a major advantage.
There is one other thing that you have to keep in mind if this place is doing any Graphic Rendering and already have Intel CPU's in a Blade array you'll have to stick with the Intel CPU's as the AMD and Intel give different colors due to the Float ring Point Integer so if this is a use there for the sake of your sanity you'll have to stick with the same type of CPU that is already there and that also includes the desktop unless Thin Clients are being run.
If you are looking at a complete new install you may get away with the AMD CPU's but any previous work done on Intel CPU's will come out a different color so this might be a reason to stick with Intel CPU's if you had those previously or AMD CPU's if you had them previously. However if you have never run Blades previously you'll have to look at the Desktop CPU's to make your finial decision as to which type of CPU you need to use.
Col
by hal 9000
by hal 9000
Just as an after thought you are comparing IBM with Intel CPU's against HP with AMD CPU's I take it that you are aware that both companies make Blades with both types of CPU aren't you?
If you are going to be stuck with one brand of CPU because of the work they will be doing it would be a better option to first look at which CPU type you'll actually need and then look for Blades that suit your needs. Just limiting yourself to these two models is not giving you enough choice as to what your solution can be.
Also you'll need to look into expansion possibilities for the future as well If you can use the U3 Rack System it will give you a lot more room to play with when the time comes to add more Computing power. The U1 Racks just take too much space and are a jungle of wires behind them which makes it hard to fault find on them.
by matharding
Poster rated this answer.
by matharding
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending