Question Locked

IDE and SATA Problems

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Asus A7N8-X Deluxe mobo, and I can't get my computer to boot with both IDE and SATA hard drives connected. It boots fine with just SATA plugged in, but when I plug in the IDE drive and the SATA drive, or just the IDE drive, it hangs at 'Verifying DMI Pool Data'. Both of the hard drives work.

5 replies

by langlier

to boot from the sata device. I'm betting its attempting to boot from the IDE.

by delta88

I have tried to do that, but in the BIOS, there is no option to change it to boot from the SATA device. There is only SCSI in the BIOS selection, and a bunch of HDD's, ex: (HDD_0, HDD_1, HDD_2).

by langlier

That should be the option you are selecting. Unless one of the HDs is your SATA HD.

by delta88

That did the trick. Thanks for the help.

This discussion is closed to new replies.