Question Locked

IDE Drive (Connected With - IDE To USB Adapter) Not Detected.

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In Windows Vista - Home Premium.
There (Is) No Response - When The USB Is Plugged In.
The Power Is "Supplied" To The Drive - And (Is) Fine.
The Drive (Is) Fine In It's Original Computer.
Yes (I - Know),... The Drive Does Not Show Up - In "Device Manager", Or "My Computer".
The Manufacturer Of The Cable - Says You Can Turn Any IDE Drive Into An External Device.
---
What's The Remedy?

21 replies

by rob miners

settings on the IDE Drive. It should be set to Master.

by bobf117

I Have To "Give" You Credit - You (Are) Smart.
But That Doesn't Seem To Be (It).
I Have Already Tried The (Default) Jumper Setting "Single - Drive" (Which - Western Digital Says - Is Pretty Much The Same As The Master Setting - It Just Spins That Drive Up First), And I Have Also Tried The Master Jumper Setting "Master - Drive".
---
That Was (A Quick Response) Though,...And Very poignant,...So I Am Giving You Credit
For That.
Anything Else - Up Your Sleave?

by rob miners

the external drive before connecting to the USB. If that doesn't work it is probably a faulty USB adapter. I use one similar to what CG IT has suggested.

The only problem with them is that the power converter goes on them if they a left constantly turned on.

To get around that I use a PSU with an on - off switch.

Edit: there is no jumpers on my WD to set it as Master.

by rob miners

double check that the IDE connector is on the right way around.

by bobf117

The (Funny) Thing Is: This IDE Connector Can-Go-Both-Ways (Which Is King Of Stupid),...And Yes,...I Actually Tried It (Both) Ways,...Which Could Perhaps (Have) Been Pretty-Stupid - Signals Going The Wrong Way - But My Drives O.K.. The Manufacurer (Should Not Have Made It That Way). There (Is) A little Nub - That's Supposed To Go In A Little Slot - In-The-Top-Center Of Connection Area,...And It Shouldn't Go The Other-Way (Flipped Over), But It Does - Like I Said,...Stupid.
----
Thanks Jacky Howe For Your Suggestion.

by cg it

on any ide drives I've used it one. SATA or floppy either.

by rob miners

I bought two of the brand that I use, I had one for myself and one for my case. The power packs only lasted two years. But they are great for connecting a variety of devices. As luck would have it I bought one for a Mate, he doesn't use it, so he gave it to me. I now have one for my case and the others I can use with a PSU. :D

I didn't leave the second one plugged in, with the switch to the USB turned off, like I did the first, but it died anyway. :(

by cg it

one for my case and one backup.

Haven't had a PSU go out yet but I really don't use them that often. Mostly use em with the laptop for ghosting on site. Dont do that often. But for $40.00 can't beat em.

by .martin.

then you might have to power the drive up, then plug in the USB-IDE cable.

I find that sometimes I need to unplug and then replug in the USB-IDE cable to get the drive working

by oh smeg

That the Chip Set in the USB Adapter is not compatible with your OS. So did you ask the Makers if it worked with Vista?

Generally though you need to set the drive to Master and make sure that the power is present to run the Drive. It's really very straight forward otherwise.

I'm assuming that you have tried another USB port here to check that it's not your USB port? ;)

Col

by bobf117

Actually,...It Was The (Seller) I Tried To Get-To-Trouble-Shoot The Situation, Not The "Maker" (Manufacturer),...And,...As I Said, "They Didn't Respond".
The Description Does (Not) Actually Say "Vista" Compatible,...But (I Think) What Their Saying Is - Pretty-Much "Everything" Windows 2000/XP/"And-Beyond",...So That Would Include "Vista" Since It (Is) Certainly Beyond XP, (And) All-Those-Others,...So (It) This Device Should Be Compatible With Vista - Even If It Doesn't So Specify It.
---
And To Further Emphasize What I'm Saying:
The (Item/Product) That CG IT Suggested "Does Not" Actually Say/Indicate Windows Vista Compatible.
Just The Usual Windows 2000/ME(I Think)/And XP.
----
Also: Yes, I Did Try The Other USB Port (On My Front) Of Computer. I Did Not Try Any Of Them On The (Back) Like Some Other Forums Have Suggested. I Think That If Something (A Device Of Some Sort) Doesn't Function Properly From The Front Inputs - Then Something's Wrong With It. If The (Impediments) Between The "Two" (Front/And Back Inputs) Is "So-Subtly-Different" To Get A Device To Work, Or Not To Work, Then That Device Is Crap. What's The "Point" Of Having Front Inputs Anyways.
Thanks OH Smeg For Your Suggestion.

by oh smeg

[i]What's The "Point" Of Having Front Inputs Anyways[/i]

Is that front ones are on a Fly Lead and the back ones are part of the M'Board. When this happens the Ports on the Fly Lead tend to transfer data slower than the ports on the M'Board and they also may not have the same Voltage/Current that is available on the M'Board.

The Front Ports are there for Low Powered and Powered devices where as the ones on the back of the unit are for All Devices. Well except maybe for any USB Ports on the Back that are located in an Expansion Slot they can be on Fly Leads. But the ones above the Sound Connector are always directly on the M'Board.

Personally from my experience if the device do not list Vista they are not compatible with Vista and I do not use them for any applications where Vista may be being used.

The way to check here is to test the unit on a XP system just to make sure that it is not a Chip Set Incompatibility. There are still several devices that worked perfectly with XP and Server 2003 but do not work with Vista. USB Com Ports are a common item as well as USB to HDD Adapters, though these are generally IDE Type adapters.

When this happens it's not so much the device being crap as the sellers not know what they are selling and they are Crap Resellers. ;)

Col

by bobf117

Yes,...I Did (Of Course) Do It That Way...
I Did (Also) Try "Powering-It-Off / And Then-On-Again" While Still Attached To The USB.
And Also, Repeatedly "Plugging-In", And "Un-Plugging" The USB Connection. And (Different) Combinations Of "Waiting 5 Minutes", "Waiting 15 - 20 Minutes", And "Waiting A Minute Or Two" (My Internal/System Drive Begins "Activity",...So I Thought It Was Doing Something),...That's Why I Waited - To Find-Out. (Yes / I Know)...You Should Get A Response Within About 30 Seconds - I Thought It Might Be Worth Waiting,...If Something Was Loading.
----
Thanks Jacky Howe For Your Suggestions.

by rob miners

You could also try it in a rear port, if it gets detected, try it again in a front port.

What are your System Specs and the make of the USB adapter?

by bobf117

Your A Regular "Helper" Jacky Howe,...In This System/Web-Site, Aren't You.
----
Well...My System Specs Are:
An (Intel) Core-2 Duo 2.4GHz - 2GB Of Memory...
----
The Brand Of Adapter/USB Is RDRIVER.
That's What It's Called Anyways - There Seems To Be (No Other) Manufacturer Information On-The-Box.
I (Think) Maybe - It's A Cheap Generic Brand - Of Device.
----
I Think Maybe The Remedy Is To Get Another (Brand),...And Try That-Out. Find Out (If) It Does Anything Different.
----
Thanks For All Your Help.

by bobf117

OH Smeg -
You (Seem) "Pretty-Smart"...
I Like To (Address) Others "Good" Qualities...
To "Inspire",...And Bring -Them -Up,...Where They Deserve To Be.
---
Now (With-That-Said) - I Have A (Sort-Of) Challenge / Test - For You:
The "Chip-Set" Your Talking About - Built Into The Adapter (Is) Just A "Converter" Sort-Of-Thing,...That Converts (The-Signal / The-IDE-Signals) To "USB" Talk -So-To-Speak-,...In Other Words, It "Converts" It To The USB (2.0) Specification. And (We) Know That (That) Specification (Is) Conpatible With XP/Vista/ME/2000/And Whatever Else. -This-Is-A-Hardware-Issue, Not An-Software-Issue.
No - Software To Install (To Be Compatible / Or Not Compatible). Just A Device To "Plug-In",...That Talks On The USB 2.0 Signal Basis.
----
I Think (Now) That I Point-That-Out,...You Know That...Don't You.
------
I Do Not Have An XP System - To Try And Test That Out - By The-Way.
I Think (System-To-System / I Mean One From Another) Might Have Different Variences In Signal Strength (Voltage) Like You Said,...And Even With Another Vista System - You Might Get Different Results.
But As I Said, I Think That (If) A Device Is So "Twitchy-Litchy" (Finigy) That With These Subtle Diferences (In Signal Strength),...Then It Probably Isn't A Very Good Device Anyways.
----
I Think The Solution To This - Is To Maybe Try (Another "Brand Of This Sort-Of-Thing).
---
Thanks OH Smeg For "All" Your Help.
I Appreciate It.

by toy_soldier40

1. just plug the adapter in and see if the drivers are detected.
2. if the drivers are found unplug it then plug in the drive.
3. if all else try it in a different pc. i had the same thing, my drivers where stuffed

by bobf117

I'm Not Sure I Understand - What You're Saying.
There (Is) No Power Supply - If The Drive Is Not Connected/Plugged-In.
(Are) You Suggesting "That" The USB Connection (Is) Going To Get "Enough" Power From(The-Computer)Its Plugged Into To Talk To The Electronics/Chip Built Into The USB-Cord/IDE-Connector To Understand What Kind-Of Device It Is.
I Think "It Requires" A (Signal-Base), Actually Coming From-The-Drive. In Other Words - (The Drive Powered-Up) - And The Signal Coming-From-That,...And (That) Is What It Goes By.
---
I'm Talking About (The System It's Plugged Into) Requires A Signal "Actually-Produced" By The Drive That (Is) Plugged In,...And That Is How "The-System" Recognizes The Device, And Of Course "Loads" The Appropriate Drivers.
----
I (Did) Try It - What You Suggested - Plugging In The Cord (By Its Self / Without The External Drive Connected / And Like I Said,...Without An External Power Supply), And Nothing.
----
I Do Have Another Computer (With Vista Basic) That I Might Try Plugging This Adapter / With Drive Attatched Into - And Findout What (It) That System Does.
But I Think Maybe The "Remedy" Is To Get Another Connector/Adapter (Of A Different Brand),...And Then Maybe (It) The Drive Plugged In - Will Be Recognized.
----
Thanks toy-soldier40@... For Your Help.

by rob miners

It's A Cheap Generic Brand.

If you haven't used the front USB connectors and it's a Desktop or Tower remove the cover and have a physical inspection to see if the front USB is actually connected.

If you have used USB devices on this System before it may have lost the plot.

Write down all fixed Disk and CD/DVD drive letters so as not to delete them. DO NOT delete any of the fixed hard disk drives or CD/DVD optical drives registry values.

1. Login with Administrative privileges.

2. Disconnect all USB or FireWire storage devices.

3. Open Registry Editor by typing regedt32 in the Run box and navigate to the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. Right click on MountedDevices and select Export. Save this file as you may need it in case something goes wrong. Save it as Devices.reg, it should default to My Documents.

4. Under HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices there will be registry keys with the name that resembles the format of \DosDevice\X: where X can be any alphabet letter which corresponding to your physical system drive letter.

5. Delete all possible USB drives, FireWire drives and external drives which have a drive letter.

DO NOT delete any of the fixed Hard Disk Drives or CD/DVD optical drives registry values.

Exclude \DosDevice\A: which normally reserved for floppy disk drives.

The USB specification for a USB port is 500mA per port. If a device needs more then 500mA, the USB port may be switched off by the over current circuit.

To avoid too high a power consumption on the used USB port, connect the External USB device to a second USB port with the additional Power cable . This provides up to 1000mA to the USB device. If the device still fails, try a self-powered USB Hub, as they are, in most cases, able to provide more than 500mA per USB port.

Edit: to add that you could try this as well

Get rid of old device drivers hidden in Vista

http://blogs.techrepublic.com.com/window-on-windows/?p=867

Whatever you decide to do, Good Luck.

This discussion is closed to new replies.